|
| kezz |
|
||
|
ok the stupid thing has come off from the glass. someone told me i need to buy a new clip for it but im not sure. am i able to just superglue it? it seems abit heavy though. any suggestions post them here!
thanks Kezz
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| cds70 |
|
||
|
Go to an auto shop they sell glue that is particular for this situation. I bought some about 1 month ago and it cost me about $5.
|
||
| Top | |
||
| kezz |
|
||
|
sweet il take a look soon. how bout the clip thing? any truth in that?
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| snap0964 |
|
|||
|
The glue is a two part mix - probably a container with a brush like applicator, which you bend to break the internal container which has the hardener.
The metal base should just need a clean up, along with the windscreen area - possibly best done carefully with a stanley knife blade, then give both surfaces a good clean. Glue your base and the windscreen, apply pressure for a few minutes, let it set overnight, back off the allen key grub screw, fit the mirror base, tighten grub screw . . . .
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| cooki_monsta |
|
|||
|
sounds like regular resin type araldyte, 2 part mix , mix both, the glue sets and is rock solid.... aval from woolies for nix
_________________ Mods: sprint kit, steeda short shift, svo lip, El handles, El Air intake, au xr wheels, lukey cat back, jbl focal and pioneer sterio <--- Sold |
|||
| Top | |
|||
| He[X]eN |
|
|||
|
cooki_monsta wrote: sounds like regular resin type araldyte, 2 part mix , mix both, the glue sets and is rock solid.... aval from woolies for nix
Yeh thats what I used 2 years ago and the mirror has never come off again! 
Super glue falls off as soon as the sun shines on it 
_________________
|
|||
| Top | |
|||
| madmax |
|
|||
|
cooki_monsta wrote: sounds like regular resin type araldyte, 2 part mix , mix both, the glue sets and is rock solid.... aval from woolies for nix
Trouble with aradite is holding it in place till it goes off. Mirror adesive give an instand hold like super glue, but retains its strength like aradite, as said it cost f**k all so better to use the right stuff.
_________________
|
|||
| Top | |
|||
| kezz |
|
||
|
madmax wrote: cooki_monsta wrote: sounds like regular resin type araldyte, 2 part mix , mix both, the glue sets and is rock solid.... aval from woolies for nix Trouble with aradite is holding it in place till it goes off. Mirror adesive give an instand hold like super glue, but retains its strength like aradite, as said it cost f**k all so better to use the right stuff. where abouts can i get mirror adhesive?
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| fuzion |
|
||
|
auto one
supercheap repco etc etc ask for mirror glue they'll show u its easy as |
||
| Top | |
||
| xpression |
|
|||
|
theres a little silver metal piece that seperates from the mirror with the removal of one screw.. remove the silver piece, glue and tape it to the windscreen, and after a day remove the tape and fit the mirror.. and walla.. good as new
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
