|
| kezz |
|
||
|
got the tints done today looks tuff excpet the front passenger window decided to s**t itself, hence it is the only window not done.
anyone fixed their power windows and wanna share some hints and tips with me? not sure what went but il take a look and post bak later any ideas would be lovely thanks Kezz
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| mr_sperm1 |
|
|||
|
fixed my driver's window a few weeks ago. easy to do.
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| camh1980 |
|
||
|
Some wreckers do a reconditioning of their power window motors, as EA to EL models all share the same power window assembly.
Remove yours first, then when you buy a reco power window motor, you hand yours in, as the reco ones have tougher cables and are thoroughly tested. If you have never touched yours before, it will be riveted to the door. You need to drill the rivets out and fit nuts and bolts for the new motor. Graphite powder and WD 40 helps the windows to glide smoothly up and down.
_________________ Instant Karma is gonna get you! |
||
| Top | |
||
| kezz |
|
||
|
ok is it as simple as removing the door trim etc and taking out the motor?
how can i be sure its the motor thats dead? come on people i cant have my car driving round with just 1 untinted window lol!
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| falconea |
|
||
|
Take off trim and locate connector just below window motor. using a spare battery and some wire test your motor from the connector if it works then u have to look further ie switchs etc.
_________________ Drive safe, arrive alive
|
||
| Top | |
||
| twirqurky |
|
||
|
falconea wrote: Take off trim and locate connector just below window motor. using a spare battery and some wire test your motor from the connector if it works then u have to look further ie switchs etc. How?
Also, what are the telltale signs that a motor is s**t itself, not just catching. |
||
| Top | |
||
| XR8Chic |
|
|||
|
Try holding the button down hard. Mine did that for months... if I pressed the button normally - nothing happened, but if I pressed it down really hard, it would work.
After about 8 months of that, the window fell off the tracks, and into the door (cable snapped), so I had to get off my a** and fix it. took about 1 hour to replace everything... (then another week to be bothered putting the trim back on.)
_________________ 1993 ED XR8 - Poly Green |
|||
| Top | |
|||
| Happy |
|
|||
|
kezz wrote: got the tints done today looks tuff excpet the front passenger window decided to s**t itself, hence it is the only window not done.
anyone fixed their power windows and wanna share some hints and tips with me? not sure what went but il take a look and post bak later any ideas would be lovely thanks Kezz there is lots of helpful info on power windows, have a search through the interior modifications section..
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
