|
| blueblood |
|
|||
|
blueblood wrote: Attachment: DSCF5533.JPG Apparently this is the correct way to install a sprintgas mixer! However backwards it looks! If its on the other way the pcv is after the gas outlets so it can suck gas into the engine and blow the rocker covers off.
_________________ 93 EB S-XR8 5 SPEED, |
|||
| Top | |
|||
| The Panel Van Man |
|
||
|
If you want to put a 425 on you will have to change your converter. At the moment you have a complex converter & a simple mixer to run a 425 you need a simple converter as a 425 is a complex mixer. Your converter will not run a 425. Vapour injection is the best answer. I do not think you will get a new 425 for $300.00 may be a S/H new are about $500.00. Are you sure that the ring was on wrong coz they only mount one way. The nozzles have to be after the Venturi so the low pressure created by the venturi will suck the gas in. Regards TPVM.
_________________ SALT IS FOR RACING ON. SAUCE IS FOR FISH & CHIPS. |
||
| Top | |
||
| The Panel Van Man |
|
||
|
Sorry, did not see your last post as to it being around the right way. My EF 5lit has Vapor injection no loss of power at all. TPVM.
_________________ SALT IS FOR RACING ON. SAUCE IS FOR FISH & CHIPS. |
||
| Top | |
||
| ToranaGuy |
|
|||
|
The Panel Van Man wrote: Sorry, did not see your last post as to it being around the right way. My EF 5lit has Vapor injection no loss of power at all. TPVM. Got any pics of the injection on the 5lt? I'm sure many, including myself would be interested to see it.... Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| blueblood |
|
|||
|
ToranaGuy wrote: The Panel Van Man wrote: Sorry, did not see your last post as to it being around the right way. My EF 5lit has Vapor injection no loss of power at all. TPVM. Got any pics of the injection on the 5lt? I'm sure many, including myself would be interested to see it.... Cheers ToranaGuy Plus one to see pics, what brand is it? Anyone know if any of the ebay injection kits will work on a 5.0?
_________________ 93 EB S-XR8 5 SPEED, |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
blueblood wrote: ToranaGuy wrote: The Panel Van Man wrote: Sorry, did not see your last post as to it being around the right way. My EF 5lit has Vapor injection no loss of power at all. TPVM. Got any pics of the injection on the 5lt? I'm sure many, including myself would be interested to see it.... Cheers ToranaGuy Plus one to see pics, what brand is it? Anyone know if any of the ebay injection kits will work on a 5.0? Work - if you get a 8cyl kit maybe, but it needs to support the HP level you are after. This kithttp://cgi.ebay.com.au/MARRELLI-8-CYL-LPG-INJECTION-LPG-KIT-Fit-yourself-/190400076558?cmd=ViewItem&pt=LH_DefaultDomain_15&hash=item2c54ba9b0e would probably do the job, but i have never heard of them before. Need to do some research. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 4 guests |
