Ok... where can these be bought from?
I intend to fit it myself to my duel fuel Falcon...

Last edited by MadMatt on Mon Aug 10, 2009 10:08 pm, edited 1 time in total.

Talk to any gas installer first. AFAIK gas injection has a big relience on the petrol ECU being Sequential and not Batch injection. You may have problems running it from an EF as its batch injection.

If I have to change the EL ignition to AU, then I will do that.

Any 1 have any info?

I thought that too, but there seems to be systems that will run on batch fire.
post1004306.html?hilit=injection#p1004306
ford-lpg-hydrogen-hho-cng-conversions-electric-f44/gas-injection-el-ghia-t79277.html?hilit=injection

There are a lot of LPG Injection systems that run on Batch Fire. My EasyJet system is capable of running on batch & sequential injected car's. It's not great for power tho, has a limit of 200kw or so iirc.

There's a mob in the UK that you can get the " front end kits " from, ordering online.

Cheers

ToranaGuy

Speak to Sean at onya gas they are based in Perth but he was a great help and sent me a system for another car i have. Been running the system for the last 2 years no issues so far..

Regards

I have bought a system off ebay, will see how it goes......

This arrived in the post today......

You do not have the required permissions to view the files attached to this post.

What brand kit is that???

whats the spec etc of this system?

Can someone please explain to me what these front end kits are? Cheers.

I think you will find that you will need to replace your existing supply line from the tank to engine bay. when I spoke to an installer he said my tank could be used but not the supply line as the diameter is too small to supply the injection system.

how are u progressing with this?

The installer I have been chatting with about installing injection has a mega gas injection system installed on his BF XR6T and only lost 2rwkw on the dyno. He also said it can be installed on my NF.

xr-lane what sorta dosh u looking at for the convo?

For the mega gas injection system?

he said it would cost $4000 to $4500 to have it installed. But been trying to get the kit from him for 2.5k or there abouts and install it myself.

I dont have a clue how to wire up the ecu that comes with the system but have a friend that can help me out with that.

Have to drill and tap holes into the BBM next to each injector to install the gas injectors, witch would be the most pain in the a** parts about the install. I hate taking off the BBM

I'm going through this process right now on my BA ad Territory. There is so much more involved than a older venturi system but so far as I can see, the wiring is very simple, just more of it.

My system is an OMVL. The feed line is a standard copper line.

And as you said, the BBM is proving to be a royal pain in the butt!

Is that everything that came with it? Do you use your existing converter with this kit?

Don't think they use a convertor, it liquid vapour injection.