BA XR6 Turbo Head ported with upgraded Valve Springs and Moly Retainers. 
Springs supported 17psi of boost, ran a 12.9 @ 116mph with traction loss 2.4 60ft
And fuel surge up top. Car is manual sedan. (unported head at time).

Ported valve bowls, short returns smoothed over, valves seated, carbon removed from chambers and valves. 

Was to be used for new engine but have decided to go all out with Ferrea Stainless Valves and full porting. 

Recommend deck be surfaced before fitting to give new clean matting surface. 

Head was in good working condition when removed and has been checked over and is in vgc. 
Engine had done 126 000k. 

Will sell with or without cam gear. 

Valves are not fitted so can be viewed before final assembly. 
Valves will be fitted on sale. 

$900 complete or $800 no cam gear
Price drop to $700 no offers.
Cams, timing gear, lifters and rockers sold, head with valves, springs & retainers only.

Paul
0466 817 025
View/Purchase from Boronia Heights Qld



Last bumped by pkr on Mon Apr 25, 2011 6:51 am.