|
| ed_fairmont_turbo |
|
||
|
Does anyone know how much power acl forged pistons can handle and how much they are? JMM quoted me $2700 for pistons and h-beam rods, anyone know of a cheaper source
_________________ ED Fairmont: Master Power GT45, race spec T5, Wolf v4, 870cc Injectors, EF bottom end, EF Head, Surcam custom Grind Cam, Crane LX92 Coil |
||
| Top | |
||
| HiBoost |
|
||
|
ed_fairmont_turbo wrote: Does anyone know how much power acl forged pistons can handle and how much they are? JMM quoted me $2700 for pistons and h-beam rods, anyone know of a cheaper source
LOL, he is a Rip off, i got quoted the same for almost $2000 forget JMM, he puts holes in pockets......i got quoted $300+ for a 3 bar map sensor from him and i picked up brand new for only $120 from some other place...
_________________ 4LTR-JET: 9.1 @150mph!! |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Want 1000 % quality C.P pistons through Quantum up in queensland.... Should be under $1800 .. Remember they are custom...
Made in USA and about 4 weeks waiting time... Spool rods have rod and piston combo for just over $2k.....
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
ed_fairmont_turbo wrote: Does anyone know how much power acl forged pistons can handle and how much they are? JMM quoted me $2700 for pistons and h-beam rods, anyone know of a cheaper source
I can do them to you for around the $2000 mark
_________________ RIP |
||
| Top | |
||
| bfhoon |
|
|||
|
acl pistons i think are the ones ford uses in the xr6turbo, people are pushing them up to 415rwkw.
yours may be a little different i was just commenting on the brand/quality.
_________________ bf xr6turbo siemens injectors, full plazmaman 800 hp intercooler kit, 5 inch cat and custom dual 2.5 inch zorst, billet flywheel with mal wood clutch kit, braided hoses, big brakes, 3.2L surge tank/w twin 044's rebuilt motor with forged and billet everything 420+ rwkw on 98. holden killer. |
|||
| Top | |
|||
| ef_frmnt |
|
||
|
hey macxr8 is that with forged rods and pistons? to suit ef/el and au motors? thats a pretty good price if so
|
||
| Top | |
||
| ed_fairmont_turbo |
|
||
|
macxr8 tell me more about the pistons and rods
_________________ ED Fairmont: Master Power GT45, race spec T5, Wolf v4, 870cc Injectors, EF bottom end, EF Head, Surcam custom Grind Cam, Crane LX92 Coil |
||
| Top | |
||
| macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
acl forged pistons and rings available in STD and 0.50mm oversize., h beam rods with ARP bolts and bronze little end bush, to suit BA turbo six. link HERE
they may also fit earlier E series, but cannot confirm at this time. PM if interested. If enough interest may be able to get a group buy happening
_________________ RIP |
||
| Top | |
||
| Dansedgli |
|
||
|
Which rods is that with?
|
||
| Top | |
||
| macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
Dansedgli wrote: Which rods is that with?
will ring the supplier in the morning and find out. I think it may be SCAT but am not 100% sure
_________________ RIP |
||
| Top | |
||
| macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
spoke with the supplier this morning, they are Precison Motorsports (generic house brand), made in same factory as Carillo and Scat rods.
_________________ RIP |
||
| Top | |
||
| macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
spoke with the supplier this morning, they are Precison Motorsports (generic house brand), made in same factory as Carillo and Scat rods.
_________________ RIP |
||
| Top | |
||
| MICKYYYY |
|
||
|
go to www.racespec.com.au and get rods and BA pistons from there
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| ed_fairmont_turbo |
|
||
|
Anyone know the BA conrod length?
_________________ ED Fairmont: Master Power GT45, race spec T5, Wolf v4, 870cc Injectors, EF bottom end, EF Head, Surcam custom Grind Cam, Crane LX92 Coil |
||
| Top | |
||
| macxr8 |
|
||||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
flyer as sent to me at work
_________________ RIP |
||||
| Top | |
||||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
1x confused Falcon..EL Falcon with full AU running gear...VCT, 5 speed, IRS, AUII front suspension, brakes, and steering RIP