|
| DA22LE |
|
|||
|
{USERNAME} wrote: Hey just wanna say that i didnt end up gettin the copper gasket, the guy got me a metal head shim and a standard gasket.. should i use the shim? or just use the standard gasket? Not sure how to correctly use the shim with the gasket, any help would be great Hey, "the guy" should be able to help you out. I'd say leave the shim out, the AU gasket should be good enuff. Cheers Daz
_________________ BA XR8 Boss 260 |
|||
| Top | |
|||
| mustang6 |
|
||
|
ok thanks ill see what happens.
_________________ 1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger. |
||
| Top | |
||
| JoeXR6 |
|
||
Age: 45 Posts: 387 Joined: 30th Nov 2007 Ride: AU111 XR6 VCT Supercharged Location: Brisbane |
Mustang6, if you have a search around the gasket/shim threads, you'll find some info on how to use them if you go with the shim. I had a shim initially on my AU, then changed to copper gasket without o-rings (bad idea, always leaked), and now have a normal acl gasket, with head studs. There were quite a few threads about shims, etc, but the manufacturer of your shim should specify how to use it.
_________________ FOR SALE! - Supercharged AUIII XR6 VCT, intercooled, T5, big brakes.... details in the 'For Sale' section - ford-parts-for-sale-f17/fs-supercharged-au-xr6-vct-series-iii-intercooled-rwc-rego-t114254.html |
||
| Top | |
||
| rumble |
|
||
|
gidday mate that is an awesome conversion, is it enginered? what was it like to fit the i6 in there? mounts etc, top stuff and good luck with the project in the future.
|
||
| Top | |
||
| PIMP_LTD |
|
||
|
Very cool, as much as i love V8's, i still give many points for what you have done, very cool stang, love it.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| mustang6 |
|
||
|
Thanks for the comments guys, engine was fairly easy to fit, gearbox was a bit harder but still most people could do it if they know how to use a welder.
Yes it has been engineered, OK update, ENgine has been put together, all new bearings, gaskets, EA pistons,head bolts, with head shim  hope for no leaks.Now just have to get my engine bay all painted and drop it back in, cant wait to drive it again. Should i run the engine in with boost? or not?
_________________ 1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger. |
||
| Top | |
||
| PIMP_LTD |
|
||
|
I have built a couple of boosted engines and always have been reccomended by engine machinist to run them in on the intended boost level, unless you intend to run real high boost. So to give you a figure, the last 2 boiosted engines i have had, i ran them in at 10 psi, and simply followed the normal rules of running in an engine.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| mustang6 |
|
||
|
OK cool thanks heaps , ill just run it on 8psi, thats what i was running before i pulled the engine down and it wasnt pinging so it should be good now its lower compression.
Im just gonna take it on a mountain run, plenty of load on it should be good
_________________ 1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger. |
||
| Top | |
||
| PIMP_LTD |
|
||
|
Sounds like a plan, as long as your tune is good, and you dont flog the guts out of it, it'll love you long time.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| mustang6 |
|
||
|
Hey does anyone know where to get a decent harmonic balancer other than the standard one?
_________________ 1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger. |
||
| Top | |
||
| 68keith |
|
||
Age: 50 Posts: 36 Joined: 14th Nov 2005 Ride: xr6ute, XE351,65 fastback muzzy Location: brisbane |
dont go in the high revs running in motor, i once broke 2 pistons on new motor (tightrings) ,throttle stuck wide open when motor torqued up. ( bed the rings in). if the temp gets high the motor might be tight. i went to the damaged car auction today ,could of got a 96-97 sedan falcon for $150 light damage left gaurd, doors ,cheap harmonic balancer came with motor ,trans,mags and lpg
_________________ xr6 ute, XE 351, 65 fastback muzzy |
||
| Top | |
||
| mustang6 |
|
||
|
OK another update engine bay is done, engine rebuilt, rocker cover painted got some eb intake manifold and wont fit my bay lol
Next im going to put my 3.55 diff gears in and minispool and im in the middle of rewiring the engine bay so i cant see any wiring. Attachment: P250309_21.25.JPG [ 293.98 KiB | Viewed 402 times ] Attachment: P250309_21.25[01].JPG [ 318.34 KiB | Viewed 411 times ] Attachment: P270309_06.34.JPG [ 210.58 KiB | Viewed 411 times ]
_________________ 1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger. |
||
| Top | |
||
| PIMP_LTD |
|
||
|
Looking mint man, keep up the great work.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| mustang6 |
|
||
|
ill try too
 just painted my dump pipe and rear turbo housing with aluminum spray paint meant to withstand 650 degrees.
_________________ 1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger. |
||
| Top | |
||
| mustang6 |
|
||
|
OK another update engine in all wiring is done, just put turbo on tonight looks good with the rear housing painted
also painted the manifold with the aluminum spray. hopefully it holds up.Attachment: P040409_08.04.JPG [ 251.94 KiB | Viewed 408 times ] Attachment: P040409_08.06[01].JPG [ 258.32 KiB | Viewed 393 times ] Attachment: P040409_08.06.JPG [ 173.5 KiB | Viewed 413 times ]
_________________ 1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
