|
| Sik_Cordz |
|
||
|
hey guys im neally finshed putting the turbo on my car but the last thing to do is the drain line i went to drill the hole in the sump but i couldnt seem to drill through . is there a special drill bit to use and also i havnt got much room to get the drill under the car and near the sump . how has everyone else done theres using the drill
cheers guys |
||
| Top | |
||
| schnoods |
|
|||
|
Small drill bit first, then go larger.
I'd be starting with a HSS "stumpy", the sort they used for predrilling for pop rivets as they have a drill point on either side. A bit of trefolex or cutting compound if your are having trouble, just dont breathe in the fumes.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
1/8 drill then use punch [ Not necessary right through] or tapered rod then thread the metal bent into sump...
Check Vortech site, on the 5.0 Mustang kit it explains how to...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
