I got myself a turbo timer today.
Now I need some help with the wiring.
what wires do i put where

the wires for the turbo timer are:
RED=12V
YELLOW= KEY ON 12V
BLUE= ACC=12V
BLACK= EARTH (Do i need to install this to the ECU earth, or will it do the same thing either way)

what colour wires should i be looking for and can I install it without removing the plastics around the steering wheel column as they are a pain in the a** to remove.



so basically im asking what colour wires in the car are:
12V always on
12V when key is in
ACC



thanks guys

you want just a body earth does not have to be to ecu,under the steering column without taking the plastics off there is a 4 pin i think brown plug,it has a very thick yellow wire in it,the yellow wire is constant 12v,then there is a thick but not as thick red wire this is power with key on,mine doesnt have an acc wire but unless you wanna look for an acc wire with a test light just put it to the key on wire.
hope this helps
chris

thanks for that, ill have a go at installing it later.