Fordmods Logo

3v let out a blood curdling scream 

 

Page 2 of 2 [ 22 posts ] Go to page Previous  1, 2

 
 Post subject: Re: 3v let out a blood curdling scream
Posted: Sun Jul 08, 2012 9:02 pm 
Getting Side Ways
Offline

Posts: 534

Joined: 14th Oct 2007

Gallery: 8 images

Location: newcastle
NSW, Australia

Benno The Viking wrote:
mystro wrote:
somtimes wont start in p put in n it starts


That's probably the switch that tells it whether it's in P or N and it thinks it isn't in P sometimes, could be from wear or an electrical problem.

As for the knocking, check the exhaust isn't rattling on something, mine used to do it until it warmed up.

on the the dash says p when in p if that makes any difference to that fault
Top
 Profile  
 
 
 Post subject: Re: 3v let out a blood curdling scream
Posted: Sun Jul 08, 2012 9:09 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia

mystro wrote:
ok can hear noise fttttthhhrrerk.


sounds like dudda dudda duda turns into a wagga wagga wagga


ahahahahahah fuk me sorry mate that made me lose it :lol: :lol: :lol: :D :D :P :P .

on a more serious note i am absolutly certin that is the exact noise of phasors dying.

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.

Top
 Profile  
 
 
 Post subject: Re: 3v let out a blood curdling scream
Posted: Sun Jul 08, 2012 10:23 pm 
Getting Side Ways
Offline

Posts: 534

Joined: 14th Oct 2007

Gallery: 8 images

Location: newcastle
NSW, Australia

thanx for replies
i wish i could change them in time lapse.
what special tools will i need please? a wedge and a phaser tool or valve spring squasher or mixture of .
or a workshop in nsw that does them no dramas fixed price i supply the parts or them supply if cheaper than importing em and buying tooling
Top
 Profile  
 
 
 Post subject: Re: 3v let out a blood curdling scream
Posted: Sun Jul 08, 2012 11:49 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia

no need for speacial tools.
just rocker covers off, mark where on the chain the little arrow is pointing to.

if its not just give the car a quick flick of the keys to get the markings up against the chain. unbolt the one that holds the phasor on, slip it off( very inportant to hold pressure on the chain in a upwards direction to make sure the chain doesnt come off the timing sprocket on the crank. if it does your fuked and timing cover has to come off. )
let the phasor drop down towards the motor and slide it off the chain and out.

put the new ones is just whacking them on. line up the mark on the sproket and the little locating pin on the back of the phasor and push it on. and yes it takes a bit of effort to get it onto the cam but its totally do-able, as i done mine.

then all back together and fire the biich up :wink:

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.

Top
 Profile  
 
 
 Post subject: Re: 3v let out a blood curdling scream
Posted: Mon Jul 09, 2012 12:34 am 
Getting Side Ways
Offline

Posts: 534

Joined: 14th Oct 2007

Gallery: 8 images

Location: newcastle
NSW, Australia

sweet thanks heaps i will definetly do it then. actually sounds really easy
get amanda to hold it and if it drops blame her.
Top
 Profile  
 
 
 Post subject: Re: 3v let out a blood curdling scream
Posted: Mon Jul 09, 2012 10:46 am 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia

yea it is easy,
you actually have to really stuff up to drop the chain off the crank sproket as its a V motor so it doesnt fall off the bottom it lays on the side.

i even took the inlet manifold off at the time and gave it a paint. there was about 2cm of dirt sitting in the valley :shock: :? so cleared that out and all sweet.

just make sure when its all togeter the injectors are plugged into the fuel rail properly so you dont give the motor a fuel shower like i did :roll: :oops: :P

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.

Top
 Profile  
 
 
 Post subject: Re: 3v let out a blood curdling scream
Posted: Mon Jul 09, 2012 12:11 pm 
Getting Side Ways
Offline

Posts: 534

Joined: 14th Oct 2007

Gallery: 8 images

Location: newcastle
NSW, Australia

fuel shower "oh noooo "
thats nearly as bad as a golden shower . :?
parts ordered last night no turning back now.
going to do the tensioners as well :)
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 22 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 17, 2017 1:47 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names