|
| Rat |
|
|||
|
hi guys, i bought a 302 clevo today. my car is a stock 250 cross flow, just wondering if the engine mounts are the same between the 250 n the v8. xe came out in v8's, thats why i was wondering,
cheers
_________________ SIGNATURE REMOVED DUE TO BREACH OF GUIDLINES. |
|||
| Top | |
|||
| Leroy |
|
||
|
off the top of my head i think not.
someone should be able to confirm, otherwise i will double check the book tomorrow and confirm
_________________ Now driving a Hilux |
||
| Top | |
||
| ELGT |
|
|||
|
Nope, very different animals, just like some wheel nuts somewhere here....bwhahahaaaaa
|
|||
| Top | |
|||
| Rat |
|
|||
|
so if there not the same, do i have 2 go 2 the wreckers n get some my self?? or is there something i can buy to change it?
_________________ SIGNATURE REMOVED DUE TO BREACH OF GUIDLINES. |
|||
| Top | |
|||
| BuNtEr |
|
||
|
Rat wrote: so if there not the same, do i have 2 go 2 the wreckers n get some my self?? or is there something i can buy to change it?
if i was you i would buy them new f**k buying them 2nd hand.
_________________ BANNED |
||
| Top | |
||
| Rat |
|
|||
|
were do i buy new ones from n does any one know how much they cost?
could i get them from rare speres??
_________________ SIGNATURE REMOVED DUE TO BREACH OF GUIDLINES. |
|||
| Top | |
|||
| Leroy |
|
||
|
probably just try conventrys or repco. would be cheap enough
_________________ Now driving a Hilux |
||
| Top | |
||
| Rat |
|
|||
|
so wat do i ask for, stronger engine mount for a 302 clevo which is goin into a 250 cross flow xe??
_________________ SIGNATURE REMOVED DUE TO BREACH OF GUIDLINES. |
|||
| Top | |
|||
| Leroy |
|
||
|
just ask for a v8 engine mount for an xe
_________________ Now driving a Hilux |
||
| Top | |
||
| BuNtEr |
|
||
|
Rat wrote: so wat do i ask for, stronger engine mount for a 302 clevo which is goin into a 250 cross flow xe??
arnt the cross members from 6 to an a 8 diffrent im sure they are, at the mounting points for the engine mounts are diffrent tell me if im wrong please some one.
_________________ BANNED |
||
| Top | |
||
| ELGT |
|
|||
|
Crossmembers are the same, just the mount that bolts on each side is different.
Go to a wrecker, get engine mount plates for a V8, XA-XE and buy new rubber engine mounts from repco or equivalent. |
|||
| Top | |
|||
| BOTTLEDUP |
|
|||
|
I second what ELGT says, you need the adaptor brackets that the engine mounts bolt to... They are getting scarce but they're still out there.
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| schnoods |
|
|||
|
Try Castlemaine rod shop as they do a bit with conversions.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
