|
| gotta luv a v8 |
|
|||
|
Hey Fella's first of all is a underdrive kit a worthwhile investment.. 2nd I can't seem to find any for the au's, I have seen some on the U.S ebay site for the 5.0L mustangs with the serpentine belts from around 1993 to 1998 would these be the same for the au's, would appreciate it if anyone who can share some knowledge, thanks
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
BPT do underdrives (same for AU as for E series) but it is MUCH cheaper to buy from evilbay or the likes. Only downside is you have to get the waterpump drilled out to suit the Aussie waterpump. But still, it's much cheaper than buying a pre drilled set.
A very worthwhile mod too!
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| gotta luv a v8 |
|
|||
|
OK thanks, are they the same as the 5L mustangs
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
gotta luv a v8 wrote: OK thanks, are they the same as the 5L mustangs You need to get the 94-95 v8 mustang set.
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| 67RCE |
|
||
|
there is no underdrive pulley for an AU. E series stuff will not work.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| XFWAGON |
|
|||
|
67RCE wrote: there is no underdrive pulley for an AU. E series stuff will not work. Will it not, Why is that? I thought the crank pulley and alt pulley was the same? Is the WP different?
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| 67RCE |
|
||
|
Crank pulley has the ignition pickup mounted on it. It's integrated into the balancer.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| gotta luv a v8 |
|
|||
|
Thanks, that explains why I can't find one
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| xafalcon |
|
||
|
AU's are already factory under-driven - the crank pulley is a full inch smaller in diameter than E-series. And there are no kits available to slow the accessories any further afaik. The benefits of further slowing the accessories would be marginal and possibly detrimental to steering assist at parking speeds and charging at criuse with high current demand.
_________________ XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual |
||
| Top | |
||
| gotta luv a v8 |
|
|||
|
Ok thanks appreciate the info.
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| Burns |
|
|||
Age: 34 Posts: 540 Joined: 9th Aug 2007 Ride: FG Ute, ED XR8 Sprint, GPZ900R Location: Leopold, Geelong |
what 67RCE + xafalcon said
_________________ The Past: EF Fairmont, EL Fairmont 5.0, HR Special, NF Fairlane 5.0, GSX 250-F, BA II XR8, VS3 Ute, VS2 L67 Calais |
|||
| Top | |
|||
| bluestripes |
|
|||
|
xafalcon wrote: AU's are already factory under-driven - the crank pulley is a full inch smaller in diameter than E-series. And there are no kits available to slow the accessories any further afaik. The benefits of further slowing the accessories would be marginal and possibly detrimental to steering assist at parking speeds and charging at criuse with high current demand. I agree with above. Currently I am rebuild a 5 lt Windsor with Trickflow top end Kit. Mechanic suggested I go with under pulley system. After a lot of research, my conclusion was, not needed, not recommended.
_________________ AU Ute ~ R350 |
|||
| Top | |
|||
| bluestripes |
|
|||||
|
xafalcon wrote: AU's are already factory under-driven - the crank pulley is a full inch smaller in diameter than E-series. And there are no kits available to slow the accessories any further afaik. The benefits of further slowing the accessories would be marginal and possibly detrimental to steering assist at parking speeds and charging at criuse with high current demand. I agree with above. Currently I am rebuild a 5 lt Windsor with Trickflow top end Kit. Mechanic suggested I go with under pulley system. After a lot of research, my conclusion was, not needed, not recommended.
_________________ AU Ute ~ R350 |
|||||
| Top | |
|||||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
