Fordmods Logo

AU MAF and Injectors Into An EF 


Page 1 of 1 [ 3 posts ] 

 Post subject: AU MAF and Injectors Into An EF
Posted: Fri Nov 28, 2008 9:29 pm 
Getting Side Ways
User avatar

Age: 33

Posts: 2282

Joined: 14th Jan 2005

Gallery: 8 images

Ride: ED Fairmont Ghia & EF XR8

Location: Melbourne
VIC, Australia

hi, ive got a set of blue 24lb au injectors and a 75mm maf and electrics sitting on the shelf doing nothing so i thought id replace the 19lb ef injectors and the tiny 55mm maf.

would all of the au gear run alright with the ef xr ecu or should i be worried about afr's

also i know the plugs are different from the 2 models so im going to have to aut and solder them but that's ok.





Posted: Fri Nov 28, 2008 11:15 pm 
EFI Guru

Age: 52

Posts: 4300

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Use the 55mm hotwire on your 70mm AU housing. Leave you 19lb injectors in place. The 24's will run too rich.
If you were able to utilise the 24's... soldering connections is a bad idea, you want to use brass crimps and adhesive heat shrink if you have to cut the harness.
Posted: Sun Nov 30, 2008 2:31 pm 
Fordmods Newbie

Posts: 9

Joined: 12th Feb 2007

Location: geelong
VIC, Australia

my ef xr8 has au maf (i assume eseries electrics)
but has 19lb injectors
is running like a prick at moment but has aftermarket ecu with s**t tune in it so im blaming that at moment.



FOR SALE: SLOXR8 supercharged ef xr8


Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



It is currently Mon May 21, 2018 2:53 pm All times are UTC + 11 hours



(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names