Fordmods Logo

balincing issiues with converting auto- manual GB on 302wefi 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: balincing issiues with converting auto- manual GB on 302wefi
Posted: Tue Aug 10, 2010 3:26 pm 
Oompa Loompa
Offline

Age: 48

Posts: 25

Joined: 4th Feb 2010

Ride: Ford XH/Nissan MQ Patrol

Location: Sydney
NSW, Australia

has anyone had any issuies with changing a auto to a manual with a windsor late model efi 5L?
I want to change one to manual but I'm thinking that once I put a balenced flywheel on, the crank weight on the front harmonic balencer will be out then too?
Any help would be good.
Top
 Profile  
 
 
 Post subject: Re: balincing issiues with converting auto- manual GB on 302wefi
Posted: Tue Aug 10, 2010 4:36 pm 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

the late model flywheel should be balanced to suit the late windsor
Top
 Profile  
 
 
 Post subject: Re: balincing issiues with converting auto- manual GB on 302wefi
Posted: Tue Aug 10, 2010 4:44 pm 
EFI Guru
Offline

Age: 58

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Yes, you need a 50oz imbalance flywheel.
Top
 Profile  
 
 
 Post subject: Re: balincing issiues with converting auto- manual GB on 302wefi
Posted: Tue Aug 10, 2010 8:24 pm 
Oompa Loompa
Offline

Age: 48

Posts: 25

Joined: 4th Feb 2010

Ride: Ford XH/Nissan MQ Patrol

Location: Sydney
NSW, Australia

XRfairmont67 wrote:
the late model flywheel should be balanced to suit the late windsor

XR9UTE wrote:
Yes, you need a 50oz imbalance flywheel.


ok I have a early model cleavland flywheel that I'm going to have rebalanced but will i still need a different harmonic balencer on the front? I've been told there different types as well manual/auto..
Top
 Profile  
 
 
 Post subject: Re: balincing issiues with converting auto- manual GB on 302wefi
Posted: Tue Aug 10, 2010 11:41 pm 
EFI Guru
Offline

Age: 58

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Your cleveland flywheel(which is 28oz in stock form) will have to balanced to 50oz to suit a 5.0 engine. So they'll have to remove weight from the flywheel on the opposite side of the existing counter weight.
The original 5.0 balancer is already 50oz so you don't need to change it.
Top
 Profile  
 
 
 Post subject: Re: balincing issiues with converting auto- manual GB on 302wefi
Posted: Fri Aug 13, 2010 7:54 am 
Parts Gopher
Offline

Age: 58

Posts: 73

Joined: 9th Dec 2007

Ride: EL Fairmont Ghia

Location: South Coast
NSW, Australia

I converted an EL Ghia 5.0 to manual and had no problem with the harmonic balancer on the front of the motor. The only drama I had was 10,000km later when the harmonic balancer delaminated Man, when it went my first thought was that the crank or a rod had busted. Here is a pic of my flywheel.

Image

 

_________________

'97 V8 EL Ghia Webasto 400 sunroof, Tint, Parnell VSI LPG, UPC 330mm brake upgrade (drilled), Pacemaker twin system, T5 conversion (Billet Products shifter)

Top
 Profile  
 
 
 Post subject: Re: balincing issiues with converting auto- manual GB on 302wefi
Posted: Fri Aug 13, 2010 11:22 am 
Parts Gopher
Offline

Age: 64

Posts: 54

Joined: 9th Jan 2007

Gallery: 11 images

Ride: any modeL fORD fALCON 6 or 8

Location: manukau city
New Zealand

Hi your earLy cLeveLand 14" 164T fLywheeL may not be compatibLe as Late windsor use smaLLer 13"diameter 157T flywheeL, however depends on type beLLhousing you are using. Hope this info is of use as it can be an easiLy overLooked, when doing manuaL conversions I've aLways taken originaL fLexpLate that has been removed and had new fLywheeL baLanced to it. Cheers...

 

_________________

Have you driven a REAL Ford...lately?

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 27, 2024 6:18 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names