|
| Briggsy666 |
|
||
|
Hi i have a 1989 da ltd,3.9l auto and wanting to put
A 5.0l motor and box out of a ef. Now i have the kframe and harness from the el but Not sure about the harness will it work Has anybody done this conversion cheers |
||
| Top | |
||
| XR9UTE |
|
||
|
You have the entire harness for the whole car or just part of it?
|
||
| Top | |
||
| Briggsy666 |
|
||
|
Yes i do have the whole harness.
|
||
| Top | |
||
| XR9UTE |
|
||
|
Ok, if you use all the EF instruments etc it will work. You may have harness length and plug problems with the rest of the vehicle though being a SWB harness in a LWB car. Otherwise you'd need to splice the EEC harness into the DA harness to allow you too keep your stock instruments for which you'd need to run another wire for the temp gauge and wire in your tacho feed.
|
||
| Top | |
||
| SWC |
|
||
|
Not sure how QLD works but would think engineering will be required as EA etc didn't come with a V8. Also probably need to meet EPA for 94/95 regulations as the motor is from those years.
|
||
| Top | |
||
| XR9UTE |
|
||
|
DA shouldn't be a problem to make a V8 especially as there's no real difference between it and DC. As the engine is from an EF it will meet those regs. Of course, they are dumb C*** in those departments so who knows what s**t they'll come up with?
|
||
| Top | |
||
| Briggsy666 |
|
||
|
Thanks for your replys has helped heaps motor and box are in
And now the wire stuff as long as it starts with the key Ill be able to sleep lol anymore info will be app ok cheers |
||
| Top | |
||
| Briggsy666 |
|
||
|
Ok i have to splice the ef harness to the da
Harness but dont no on the ef harness there is 3 plugs that go behind th Heater box just in side the firewall on the Da one there for the heater a** Think i might need auto elecy |
||
| Top | |
||
| XR9UTE |
|
||
|
Nah just get a coupla workshop manuals and do it yourself.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |