|
| ebfreak |
|
|||
|
Just thought I would let everyone know that removing the clutch fan on my 5l has finaly made me crack and is PISSING ME OFF!!!
Helpful suggestions appreciated. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
hi
just a tip.. did you know that they are left handed thread... so you might be turning it the wrong way.. |
||
| Top | |
||
| ebfreak |
|
|||
|
I thought they were right hand on the 8cyl
|
|||
| Top | |
|||
| MRE-50L |
|
|||||
|
here this may be help full
_________________ Chance Favors The Prepared Mind ! |
|||||
| Top | |
|||||
| Brett3158 |
|
||
|
My Max Ellery manual confirms that the nut on a 8cyl is a right hand thread. When I did one on a six I just used a large pair of vice grips on the nut, and a length of pipe which went over the handle of the vice grips. I jammed a screwdriver or socket handle in the belt and it came loose.
|
||
| Top | |
||
| ebfreak |
|
|||
|
YIPPEE!!
I finally got the sucker off. Thanks for ya help fellas. I hope that water pump spanner helps somone MRE-50L. |
|||
| Top | |
|||
| MRE-50L |
|
|||
|
same here , funnie thing is i used a big hammer n chisel to get mine off CBF making up the tools
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| TROYMAN |
|
||
|
ebfreak wrote: I thought they were right hand on the 8cyl
sorry i might have got them mixed up.. good to see ya got it off... |
||
| Top | |
||
| ebfreak |
|
|||
|
ef thermos are in and working well, and it only took me 8 hours (sarcastic) (4 hours more than it should have done).
MRE-50L, you should put that spanner in the tech docs forum. |
|||
| Top | |
|||
| Ben_Daui |
|
|||
|
ebfreak wrote: ef thermos are in and working well, and it only took me 8 hours (sarcastic) (4 hours more than it should have done).
MRE-50L, you should put that spanner in the tech docs forum. Yeah well Dave & Rob could do it! Rob did mine in less then 2hrs but I spose when mine was done he had performed 5 conversion it would be PISS EASY 
_________________ MEMBER 1390 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
