|
| ea_falcon |
|
||
|
guys ive got the 2000 au failane 50.l with the stock heads
so far my mods r pacies, 3'' pacie zorst, cia, elderbrock upper and lower manifold, and cappa tune what alloy heads im not to worried about $$ but if there are cheaper ones that re good i wont complain  will be good for mine im also putting a light cam in it if you know the parts number and the exact ones to get that would be much appreciated cheers fellas
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| 67RCE |
|
||
|
AFR165's. End of story.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| ea_falcon |
|
||
|
ive heard that my extractors wont work with these heads...I have got gt40p heads and these have raised ports and the spark plugs are on a different angle
what heads will be a direct replacement to suit my extractors?
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Scaffy |
|
|||
|
Just to open the story back up, I use the Trick Flow Twisted Wedges and couldn't be happier with them. Both heads perfom pretty much the same, so if you went one or the other, you'd be a pretty happy camper. I wouldn't close the book on either one of them.
I don't recall hearing anything about GT40p headers not fitting either of these heads...
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| ea_falcon |
|
||
|
so should the same model number afr 165's or the trickflow heads fit on the au ford with after pacemaker headers aswell as fit onto say the eb 5.0 with headers to suit the eb?
does that make sense lol?
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Scaffy |
|
|||
|
My EL XR8 has Defilippo 4 into 1s on my TW heads. I bought another EL XR8 with the same headers on a set of GT40ps. I hope that's what you were asking...
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
It's the spark plug angle which interferes with headers on GTP heads...
These headers / extractors can fit on other heads... Yep I have TFS R series Trick Flow heads heads..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| ea_falcon |
|
||
|
yeah scaffy thats what i meant
i just heard somewhere the that the extractros from an au 5.0l wont fit on the e series v8s with just the gt40 heads or the other stock ones they come with
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| XFWAGON |
|
|||
|
ea_falcon wrote: yeah scaffy thats what i meant i just heard somewhere the that the extractros from an au 5.0l wont fit on the e series v8s with just the gt40 heads or the other stock ones they come with Because E series have to use C*** shaped headers to fit the engine bay.
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| Scaffy |
|
|||
|
Yeah, AU and E-series have different headers. AFAIK, they're not interchangable.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| ea_falcon |
|
||
|
so thats my point if i get a set of heads i have to get the ones that suit the au ford and not the e series other wise i will have to customize my extractors to suit the alloy heads
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Vic |
|
|||
|
I believe so Ash.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| xafalcon |
|
||
|
I agree with using AFR heads, but I'd suggest the slightly bigger 185's. The AFR185 heads have considerably more potential with minimal sacrifice down low over the 165's. This leaves the door open for future upgrades (eg 347) while knowing the heads will be sufficiently sized. If you do go this way, also get the spring upgrade package as like most other alloy heads the AFR's only come with flat tappet capable springs
All AFR heads are fully CNC ported. I buy the entry level ones that aren't fine finished in the ports, and use a die grinder & cartridge roll to improve the finish. Only a few hours work The SBF heads mentioned so far have the same exhaust bolt pattern and port location. So headers that fit GT40P heads will also fit all the above alloy heads. It is the primary pipe orientation that changes between "normal" heads and GT40P heads due to the altered spark plug angle, although even this is often way over-stated as being problematic.
_________________ XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Only issue with 185's is the pistons require notching...
If using std pistons... P2V Should be checked in any build ..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Scaffy |
|
|||
|
ea_falcon wrote: so thats my point if i get a set of heads i have to get the ones that suit the au ford and not the e series other wise i will have to customize my extractors to suit the alloy heads No mate, the reason they are not interchangable is because there's different crap going on in the engine bay. Like was previously said, the steering shafts are in different positions, therefore the headers are designed to suit their application. The exhaust ports are still in the same position on the heads.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
