Fordmods Logo

Lifters or pining? 

 

Page 1 of 1 [ 13 posts ] 

 
 Post subject: Lifters or pining?
Posted: Sun Jun 16, 2013 9:19 pm 
Getting Side Ways
Offline

Age: 36

Posts: 546

Joined: 5th Jun 2010

Ride: BA XT, NCII V8

Location: Adelaide
SA, Australia

Hey guys have a NC 302 pretty much stock, when i start the car cold it wont idle corectly seems to run like its got a cam in it but it doenst.

when under load it ticks like crazy and no tick on idle or when just giving it a rev in Neutral.

just wondering if i have a noisy lifter or is it another issue and how to look for and rectify it

Thanks
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Sun Jun 16, 2013 9:26 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

if it only does it under load and not when free revving its more than likely pinning
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Sun Jun 16, 2013 9:30 pm 
Getting Side Ways
Offline

Age: 36

Posts: 546

Joined: 5th Jun 2010

Ride: BA XT, NCII V8

Location: Adelaide
SA, Australia

should i start with plug gaps and maybe retard the timing a little?
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Sun Jun 16, 2013 9:30 pm 
Getting Side Ways
Offline

Age: 47

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

Could also possibly be a f**k exhaust manifold gasket.
They get worse under load.

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Sun Jun 16, 2013 9:41 pm 
Getting Side Ways
Offline

Age: 36

Posts: 546

Joined: 5th Jun 2010

Ride: BA XT, NCII V8

Location: Adelaide
SA, Australia

that would sound about right as when i bought the car there was 3 bolts missing on either side for the headers i put some in, but gasket could of gone to poo while it only had a few bolts in it
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Sun Jun 16, 2013 11:25 pm 
EFI Guru
Offline

Age: 58

Posts: 4351

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

The exhaust gasket is pining for the FEULDS!!!!
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Mon Jun 17, 2013 2:32 pm 
Getting Side Ways
Offline

Age: 36

Posts: 546

Joined: 5th Jun 2010

Ride: BA XT, NCII V8

Location: Adelaide
SA, Australia

FEULDS!!!! ?????

not sure what that is supposed to mean.
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Mon Jun 17, 2013 5:41 pm 
Getting Side Ways
Offline

Age: 36

Posts: 546

Joined: 5th Jun 2010

Ride: BA XT, NCII V8

Location: Adelaide
SA, Australia

ok played with it today, the sound is comming from piston 1, its on sublte on idle but gets loud on load.

i retarded the timing a little and it was a little better but did not go away, so i retarded it a little more and it stalled so put it back, any ideas,

the spark plug looked ok gave it a clean anyway, made no difference, found a vac leak and fixed that and it solved my idle issue but stick a taping noise from piston 1 under load.
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Mon Jun 17, 2013 5:53 pm 
Getting Side Ways
Offline

Age: 47

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

Remove the plug lead of the cylinder the noise is coming from and take it for a quick drive.
If it disappears you may be looking at a stuffed gudgeon pin.

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Mon Jun 17, 2013 6:58 pm 
Getting Side Ways
Offline

Age: 36

Posts: 546

Joined: 5th Jun 2010

Ride: BA XT, NCII V8

Location: Adelaide
SA, Australia

if it ends up being something like that ill keep driving it till it detonates then put a new engine in as i have a spare 302 in the shed
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Tue Jun 18, 2013 11:10 am 
EFI Guru
Offline

Age: 58

Posts: 4351

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

wtbdlltd wrote:
FEULDS!!!! ?????

not sure what that is supposed to mean.


What...you're not a pythonist!? John Cleese wouldn't approve.
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Sat Jun 29, 2013 3:17 pm 
Stock as a Rock
Offline

Age: 63

Posts: 102

Joined: 19th Dec 2010

Gallery: 4 images

Ride: EF Futura / FG XR6 / DF LTD

Location: Sydney
NSW, Australia

wtbdlltd wrote:
FEULDS!!!! ?????

not sure what that is supposed to mean.


I think he means Pining for the Fjords . The Norwegian Blue prefers kipping on its back .
Top
 Profile  
 
 
 Post subject: Re: Lifters or pining?
Posted: Sat Jun 29, 2013 7:30 pm 
EFI Guru
Offline

Age: 58

Posts: 4351

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

wrongwaynorris wrote:
wtbdlltd wrote:
FEULDS!!!! ?????

not sure what that is supposed to mean.


I think he means Pining for the Fjords . The Norwegian Blue prefers kipping on its back .


Beautiful plumage!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 13 posts ] 

Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 20, 2024 7:20 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names