|
| richie |
|
||
|
Just getting ready to tune the 5.0L on engine dyno with M800.
Once this engine is up & going will start on 331. Re the 331 - Bit of messing around because there are enough bits (apart from 2 blocks) to build 3 with varying specs - it's like seagulls fighting over scraps! Will restart thread when we get going on machining. Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| richie |
|
||
|
Just tuning the mild 5.0 on the engine dyno - should be finished next week.
Will start on 331. Have enough bits to build 3 ( apart from 2 blocks ). Its like seagulls at the tip picking over the bits. Mine bits are more or less settled - just need to sort calcs for cam etc. so can drive on the street. Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |