Oil cooler setup - www.fordmods.com

Home » Forums » Fordmods Tech » V8 Workshop

Oil cooler setup

Page 1 of 1 [ 10 posts ]

Post New Topic Post Reply

Previous topic Next topic

milo 302

Post subject: Oil cooler setup

Posted: Mon Jan 04, 2010 5:45 pm

Tyre Shredder

Offline

Posts: 341

Joined: 5th Dec 2009

Location: Perth
WA, Australia

Does anyone have any pics of the factory oil cooler setup on the 220kw, how the lines leave the block.
Cheers milo

Top

Profile

XH5LWEPN

Post subject: Re: Oil cooler setup

Posted: Mon Jan 04, 2010 10:54 pm

Getting Side Ways

Offline

Age: 37

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia

I dont think i've got any pics from when i fitted the 220kw motor with oil cooler to the missus car.
But i can tell you that the lines run from, and back to, a sandwich plate located between the oil filter and block.
Having the sandwich plate in there which is about an inch thick, means that you have to then use the shorter Z89A oil filter instead of the Z9.

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!

Top

Profile

XH5LWEPN

Post subject: Re: Oil cooler setup

Posted: Mon Jan 04, 2010 11:00 pm

Getting Side Ways

Offline

Age: 37

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia

Here ya go.
Heres a pic of my mates AUII 220kw Motor that we pulled out for a build.
This clearly shows the oil cooler sandwich plate.

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!

Top

Profile

milo 302

Post subject: Re: Oil cooler setup

Posted: Mon Jan 04, 2010 11:14 pm

Tyre Shredder

Offline

Posts: 341

Joined: 5th Dec 2009

Location: Perth
WA, Australia

Ahh thats how they did it, thats awesome man.
thanks for taking the time out to chuck up that pic, muchly appreciated
Cheers Milo

Top

Profile

XH5LWEPN

Post subject: Re: Oil cooler setup

Posted: Mon Jan 04, 2010 11:17 pm

Getting Side Ways

Offline

Age: 37

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia

No worries mate.
Do you work at XFT?

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!

Top

Profile

milo 302

Post subject: Re: Oil cooler setup

Posted: Mon Jan 04, 2010 11:28 pm

Tyre Shredder

Offline

Posts: 341

Joined: 5th Dec 2009

Location: Perth
WA, Australia

Nah ive met simon before though

Top

Profile

TKFD

Post subject: Re: Oil cooler setup

Posted: Sat Jan 16, 2010 10:21 pm

Stock as a Rock

Offline

Age: 55

Posts: 150

Joined: 6th Nov 2009

Ride: AU2 XR8

Location: waroona
WA, Australia

the K&N oil filters are supposed to be good. they make to fit shorter oil cooler types

Top

Profile

XH5LWEPN

Post subject: Re: Oil cooler setup

Posted: Sun Jan 17, 2010 4:50 pm

Getting Side Ways

Offline

Age: 37

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia

TKFD wrote:

the K&N oil filters are supposed to be good. they make to fit shorter oil cooler types

Thats right.
Cant remember part number though.
Got one on the missus car now with the oil cooler sandwich plate aswell.

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!

Top

Profile

TKFD

Post subject: Re: Oil cooler setup

Posted: Mon Jan 18, 2010 10:55 pm

Stock as a Rock

Offline

Age: 55

Posts: 150

Joined: 6th Nov 2009

Ride: AU2 XR8

Location: waroona
WA, Australia

HP-1009.

And they come with the easy fitting wrench/nut. Easy to strip though, so careful

Top

Profile

XH5LWEPN

Post subject: Re: Oil cooler setup

Posted: Mon Jan 18, 2010 11:04 pm

Getting Side Ways

Offline

Age: 37

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia

TKFD wrote:

HP-1009.

And they come with the easy fitting wrench/nut. Easy to strip though, so careful

Fvck man, to strip that nut on the end of the filter, it would have had to have been WAY too tight, lol.

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 10 posts ]

Jump to:

Home » Forums » Fordmods Tech » V8 Workshop

Who is online
Users browsing this forum: No registered users and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Fri Apr 26, 2024 12:35 pm

All times are UTC + 11 hours