|
| tyler06 |
|
||
|
Hi all,
Can anyone tell me what pins to bridge out on my EF f/ghia 5ltr so i can adjust the timing? Is there anything else to do or just bridge adjust and turn off then go? Cheers All. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
I don't think u can adjust the timing as ef runs a coilpack , unless the 5L is dizzy??
I'm not sure what pins. But u bridge it then wait 2 minutes for the idle note to change then it will be in diagnostic /base mode ?? Then u can check it with a timing light. Then turn off the engine adjust dizzy and check again
_________________ El XR6 Turbo |
|||
| Top | |
|||
| tyler06 |
|
||
|
ef_falcon_95 wrote: I don't think u can adjust the timing as ef runs a coilpack , unless the 5L is dizzy?? I'm not sure what pins. But u bridge it then wait 2 minutes for the idle note to change then it will be in diagnostic /base mode ?? Then u can check it with a timing light. Then turn off the engine adjust dizzy and check again Yeah mate 5ltr is dizzy and i will try the trouble code pins and see if they put it in diagnostic mode as they are the only pins i know do anything. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
I found out which pins it is, u bridge the upper and lower pins on the left hand side of the diagnostic port . Which is located in the fuse box. Then start the car and wait till it's on base timing mode .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| tyler06 |
|
||
|
Thanks a million mate.
|
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
No probs
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 28 guests |
