|
| BlownNc |
|
|||
Age: 41 Posts: 451 Joined: 5th Nov 2004 Ride: 5lt Turbo NC, TE V6 Gemini Location: Castlemaine |
Seriously...what's the biggest cube motor that will fit in a e series engine bay without major mods? Just for curiosity's sake?
|
|||
| Top | |
|||
| Southy |
|
|||
|
guy on FF put a 351 into his EA......
|
|||
| Top | |
|||
| Sturmovik |
|
|||
|
351W with 420+ cube stroker.
Bolt straight onto to 302W mounts, and easily fit between the towers. May need a hole in the bonnet though depending on what intake manifold you run.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| One Drone |
|
|||
|
If you don't want to modify the bonnet, a 371 will fit. Same as a 302 being 8.2" tall.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| golding |
|
|||
Age: 68 Posts: 53 Joined: 5th Aug 2006 Ride: 2009 FG Falcon G6E Sedan Location: Davoren Park |
Does it have to be a Windsor?
Have an EA at moment and would like to put small 90degree (Clev?) V8 into it if possible. It's just that the windsors fairly well suck unless modded like XR8 and for that sort of money (extremely broke pensioner) I'll give it a miss. Unless there is a Sugar Daddy out there with one to spare .. hehe 
_________________ Regards, Robert
|
|||
| Top | |
|||
| old_mate |
|
|||
|
World/Man O War (forget which) 460 cube SMALL block crate motor
_________________ too many rabbits in china |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
old_mate wrote: World/Man O War (forget which) 460 cube SMALL block crate motor
Thats the one it is the World Man-o-War 460. Based on a 9.2 351 windsor Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| kapul |
|
|||
|
351clevo or windsor is the nicest fitting motor that would fit but in the whole scheme of things, it depends on how much money as wat can fit...my mate who i work with has a big block 7.4 liter 454 chev under the bonnet (and through the bonnet lol) of his EF.Hes a damn bloody good mechanic tho!!!
_________________ Fact: Chuck Norris is so fast he can run around the world and hit himself in the back of the head
|
|||
| Top | |
|||
| BlownNc |
|
|||
Age: 41 Posts: 451 Joined: 5th Nov 2004 Ride: 5lt Turbo NC, TE V6 Gemini Location: Castlemaine |
well...ive been dreaming for ages of building a big cube n/a injected motor for cruising, a few burnouts etc... i was planning along the lines of a 347w but if i can start with a 351w and stroke it...then maybe a snail or two...again, hypothetical at the moment, but i've got holidays coming up and some cash in the bank, i could make a start...so if i was to go a 351w, what stroker kit is recommended?
|
|||
| Top | |
|||
| XR9UTE |
|
||
|
The Man-o-war 460ci windsor is based on the 9.5" deck block(same as stock 351w).
You can also fit an FE(10.17" deck) or 400C(10.3" deck) or 385 series(10.3" deck) bigblock. 385 series(429/460) can be had out to more than 600ci. Bonnet clearance is a problem with these engines(if you care) otherwise there is plenty of room for them. You could also fit the 6.8 V10(10.07" deck) with similar bonnet clearance problems. Pete. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
