Fordmods Logo

xf ute carby tuneing HELP 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: xf ute carby tuneing HELP
Posted: Thu Jun 18, 2009 8:56 pm 
Stock as a Rock
Offline

Posts: 114

Joined: 27th Dec 2008

Gallery: 5 images

Ride: EB Falcon

Location: Bundoora
VIC, Australia

i got myself a ute runs gas only gas got it somewhat running on both thing is on petrol u can use more than 3mm of peadle untilll sheee goesss brooooooom pissss bang crackle bang errrrrrrrrr and not moveing anywhere apart from a random jerk of powerand that foot 3/4 1/4 1/2and fully to the floor pain in the a** and i need it runnning on petrol so i can take the gas tank out and still dive the car need to fix this f**k thing before 10.30 saturday i hve to drive the ute to bendigo 150km away from me, and if its easyer and u know what your doing come around give me a hand..... :D :mrgreen:

 

_________________

'Hoon- related' offences are:
Improper use of a motor vehicle, where the driver has intentionally caused one or more tyres to lose traction.

Top
 Profile  
 
 
 Post subject: Re: xf ute carby tuneing HELP
Posted: Tue Jun 23, 2009 2:49 pm 
Fordmods Newbie
Offline

Age: 34

Posts: 7

Joined: 9th Sep 2007

Ride: Falcon Xe

Location: Bendigo
VIC, Australia

so what you are saying is that it runs on gas fine but not on petrol?

I'm going to guess its a carby ute?

you will probably find that theres probably a number of problems happening which probably include;

1. the fuels stale
2. the fuel pump is dead from not being used
3. the carby has dried out from being driven on gas all the time
4. theres crap in the fuel thank that needs cleaning out
Top
 Profile  
 
 
 Post subject: Re: xf ute carby tuneing HELP
Posted: Tue Jun 23, 2009 5:55 pm 
Stock as a Rock
Offline

Posts: 114

Joined: 27th Dec 2008

Gallery: 5 images

Ride: EB Falcon

Location: Bundoora
VIC, Australia

thanks man
tell if that helped by saturday

 

_________________

'Hoon- related' offences are:
Improper use of a motor vehicle, where the driver has intentionally caused one or more tyres to lose traction.

Top
 Profile  
 
 
 Post subject: Re: xf ute carby tuneing HELP
Posted: Tue Jun 23, 2009 5:58 pm 
Fordmods Newbie
Offline

Age: 34

Posts: 7

Joined: 9th Sep 2007

Ride: Falcon Xe

Location: Bendigo
VIC, Australia

well did you get it sorted?
Top
 Profile  
 
 
 Post subject: Re: xf ute carby tuneing HELP
Posted: Tue Jun 23, 2009 6:05 pm 
Stock as a Rock
Offline

Posts: 114

Joined: 27th Dec 2008

Gallery: 5 images

Ride: EB Falcon

Location: Bundoora
VIC, Australia

fuel tank has orange s**t caked in it fuel pump was stuffed orange powder caked in it the petrol diode is f**k doesnt open constant closed

put new carby and pump on and fuel hose with no cut off diode from pump to carby and still when driving it cuts out when u use a norm amount of pedal (or any pedal for tht matter )to collect speed and u hae to just touch the pedal so she doesnt stall and keep revs at 1100rpm all the time when car not moveing

 

_________________

'Hoon- related' offences are:
Improper use of a motor vehicle, where the driver has intentionally caused one or more tyres to lose traction.

Top
 Profile  
 
 
 Post subject: Re: xf ute carby tuneing HELP
Posted: Tue Jun 23, 2009 6:06 pm 
Stock as a Rock
Offline

Posts: 114

Joined: 27th Dec 2008

Gallery: 5 images

Ride: EB Falcon

Location: Bundoora
VIC, Australia

and black power comes out of exhaust

 

_________________

'Hoon- related' offences are:
Improper use of a motor vehicle, where the driver has intentionally caused one or more tyres to lose traction.

Top
 Profile  
 
 
 Post subject: Re: xf ute carby tuneing HELP
Posted: Tue Jun 23, 2009 6:17 pm 
Fordmods Newbie
Offline

Age: 34

Posts: 7

Joined: 9th Sep 2007

Ride: Falcon Xe

Location: Bendigo
VIC, Australia

that black powder is soot from the motor, a great symptom of the car running too rich
probably because your carby is fu*ked, idol speed is controlled by a screw on the throttle linkage so you should be able to adjust that.

something that might make it run better is directly above where the EGR point enters the inlet manifold (egr being the pipe that goes from the exhaust over the rocker cover and into the inlet below the carby) there will be a hole in the carby that you can stick a flat head screwdriver in. this is the idol mixture screw, if you lean it off a bit the ute might drive a bit better.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 27, 2024 3:53 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names