|
| J_mac |
|
||
|
heya`s,can any one help with info to install A/F guage on a ef falcon i6? i.e. location of oxy sensor signal wire nearest to dash e.t.c.also how to plumb a catch can like the "Monza" type....cheers
|
||
| Top | |
||
| twr7cx |
|
|||
|
the oxy sensor wiring is just on the other side of the firewall from the dash.
or alternatively the ecu in the passenger footwell. |
|||
| Top | |
|||
| J_mac |
|
||
|
thanks for the info.I did follow the sensor wires to the firewall but wasn`t sure wich is signal and which is heater?
|
||
| Top | |
||
| twr7cx |
|
|||
|
J_mac wrote: thanks for the info.I did follow the sensor wires to the firewall but wasn`t sure wich is signal and which is heater?
your going to need some wiring diagram to give you the colour of the wires and lety you know. |
|||
| Top | |
|||
| J_mac |
|
||
|
thankyou for your help,found this.
http://www.fordmods.com/forums/viewtopi ... oxy+sensor just what i needed  .cheers for your help.
|
||
| Top | |
||
| efmarek |
|
||
|
hey pal dont forget its a "narrow-band" oxy sensor....
It will only tell u when its running at 14.7:1 AFR.
_________________ LUMPY-6 |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 2 guests |
