|
| ride.in.peace |
|
||
|
Hi im just wondering if a 9" diff center fit into a standard xr6 lsd housing
thanks |
||
| Top | |
||
| SWC |
|
||
|
No.
|
||
| Top | |
||
| ride.in.peace |
|
||
|
What would be the best way to go about getting a 9" diff?
|
||
| Top | |
||
| Disco Frank |
|
|||
|
ride.in.peace wrote: What would be the best way to go about getting a 9" diff? you will need a full diff housing and axle made to fit your car .. why though? u putting like 700 rwhp? a stock xr6 lsd will/should handle a mild turbo setup
_________________ RIP SCOTT |
|||
| Top | |
|||
| ride.in.peace |
|
||
|
I wish! Na I blew the lsd that was in it so I brought another 2nd hand lsd, maybe 3 months later (now) its acting like an open diff and has been making a bit of noise.. I dont want to keep buying worn out 2nd hand diffs, may as well get something that will definitely handle getting hammered, a re-con seems to be around the same price as getting a 9" set up...
|
||
| Top | |
||
| TROYMAN |
|
||
|
the weight of the heavier rotating mass of a 9" will zap away a bit of your performance unless your pushing 500+ hp then you wouldn't notice..
but the bw diff is pretty damn strong and can take 500hp, your problem is your using second hand diffs that are probably already worn out.. a fully rebuilt bw diff is around $500-$1000 a custom 9" modified to suit the 4 link suspension with decent diff gears rebuilt center will cost around $2000.. |
||
| Top | |
||
| TimmyA |
|
|||
|
Or throw the LSD in the bin and fit a proper performance centre like a Lokka or a trutak...
This will fix all your worn out problems and you can fit a Lokka yourself with no reshimming needed (needs to go into a std hemisphere but, not an LSD)... Or a trutak will need to be shimmed to check for mesh pattern... I've had a Lokka and it wasn't for me... But was fantastic for driving hard... One day when I have spare money I'll be fitting a trutrak... this may be some years away but... http://www.ebay.com.au/itm/271265812785 ... 1423.l2649 Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| bry40l |
|
|||
|
you can even get billet axles for the standard bw diff before fitting a 9 inch. people are running 9s down the 1/4 on stock diffs with upgraded axles!
_________________ BF XR6 |
|||
| Top | |
|||
| ride.in.peace |
|
||
|
Ok thanks for the advice
also anyone know where I can buy the clip the attaches the clutch cable to the pedal? Everywhere I go cant order it in? And if anyone knows what its actually called that would be awesome thanks |
||
| Top | |
||
| TimmyA |
|
|||
|
http://www.ebay.com.au/itm/GENUINE-FORD ... 43ba818555
Easy... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| ride.in.peace |
|
||
|
Legendary
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 34 guests |
