Fordmods Logo

BTR 4 speed automatic problem[ 

 

Page 1 of 1 [ 3 posts ] 

 
 Post subject: BTR 4 speed automatic problem[
Posted: Tue Jan 27, 2015 8:47 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 2

Joined: 27th Jan 2015

Ride: ford falcon ba

Location: Araluen
NSW, Australia

[Could someone put me in the right direction.
Problem been after car is driven or sitting for a few minutes D flashesd nad car go's into limp home mode.leave car to cool down no problem then the same when warmed up again. When put into park on neutral a noise like a cavitation or chattering solenoid. Noise is not present in drive or reverse. Have checked all wiring and cleaned connections. New filter an oil done as well only a very small amount of material found no more than normally.
Codes with scan tool
P0753 solenoid A
P0758 solenoid B
P0763 solenoid C
P0768 solenoid D
P1748 EPC
I have reset pcm and manual flashed auto by placing in D and hold key on till seatbelt light go's out.
If someone could advise me it would be appreciated.
Top
 Profile  
 
 
 Post subject: Re: BTR 4 speed automatic problem[
Posted: Wed Jan 28, 2015 4:46 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 2

Joined: 27th Jan 2015

Ride: ford falcon ba

Location: Araluen
NSW, Australia

1flatdog5 wrote:
[Could someone put me in the right direction.
Problem been after car is driven or sitting for a few minutes D flashesd nad car go's into limp home mode.leave car to cool down no problem then the same when warmed up again. When put into park on neutral a noise like a cavitation or chattering solenoid. Noise is not present in drive or reverse. Have checked all wiring and cleaned connections. New filter an oil done as well only a very small amount of material found no more than normally.
Codes with scan tool
P0753 solenoid A
P0758 solenoid B
P0763 solenoid C
P0768 solenoid D
P1748 EPC
I have reset pcm and manual flashed auto by placing in D and hold key on till seatbelt light go's out.
If someone could advise me it would be appreciated.
1flatdog5 wrote:
[Could someone put me in the right direction.
Problem been after car is driven or sitting for a few minutes D flashesd nad car go's into limp home mode.leave car tocool down no problem then the same when warmed up again. When put into park on neutral a noise like a cavitation or chattering solenoid. Noise is not present in drive or reverse. Have checked all wiring and cleaned connections. New filter an oil done as well only a very small amount of material found no more than normally.
Codes with scan tool
P0753 solenoid A
P0758 solenoid B
P0763 solenoid C
P0768 solenoid D
P1748 EPC
I have reset pcm and manual flashed auto by placing in D and hold key on till seatbelt light go's out.
If someone could advise me it would be appreciated.

I have had fiddle today and found PCM was heating up when cooled down with water on PCM or let cool for a few hours light dis not come on till it heated up again. I did this a few times to check and came to the same result.
Top
 Profile  
 
 
 Post subject: Re: BTR 4 speed automatic problem[
Posted: Wed Jan 28, 2015 5:16 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

if by cooling the pcm the problem goes away I say your pcm is the problem..
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 26, 2024 4:13 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names