|
| EDCoonsta |
|
||
|
Hey subject pretty much says it all, i have a 9 inch diff (checked) but isnt LSD and the gear ratio 3.27.1 would like to change to 4.11.1 and lsd, just wanting a bit more info from people who have done it before, and approx how much it will cost as well, also want to know approx how much replacing a rear axle (slightly bent)
cheers any info would be great 
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
EDCoonsta wrote: Hey subject pretty much says it all, i have a 9 inch diff (checked) but isnt LSD and the gear ratio 3.27.1 would like to change to 4.11.1 and lsd, just wanting a bit more info from people who have done it before, and approx how much it will cost as well, also want to know approx how much replacing a rear axle (slightly bent) cheers any info would be great What car is this in? if its your E series, it does not have a 9". Unless it has been retro fitted. I repeat, does not have a 9" unless you or someone else has put it in.
_________________
|
|||
| Top | |
|||
| EDCoonsta |
|
||
|
as ive said it has a 9 inch (checked)
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
Cool, got some photos of it? I would like to see it. If its a 9", and 9" LSD centre off ebay will do. The ratio does not sound 9" though.
_________________
|
|||
| Top | |
|||
| EDCoonsta |
|
||
|
Il have to take a few pics its raining at the moment tho cant really til it dies (mums got the undercover parking haha) i was just going by the ratio on the tag, yea been looking at centres for around $200 diff gears around the same is that a reasonable price?? the guy at pedders said he can fit it if i get the parts or they can sorce them for me (he was the one who told me it was 9")
|
||
| Top | |
||
| SWC |
|
||
|
Ford 9' Diff Ratio’s available - 3.00, 3.25, 3.50, 3.70, 3.89, 4.11, 4.30, 4.57, 4.63, 4.71, 4.86, 5.00, 5.14, 5.23, 5.47, 5,63, 5.83, 6.00, 6.13, 6.22, 6.33, 6.50.
|
||
| Top | |
||
| Matt_jew |
|
||
|
First question. Does it have a bolted on removable hat on the rear of the diff covering the diff centre?
Is it bolts through a cover at the rear to get to the centre or is it nuts on studs through the front of the diff? If you have a 9" conversion in an ED rip it out and fit a borg warner and sell the 9" to someone that has enough power to justify it and put the dollars in your pocket.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| cjh |
|
|||
|
3.27 gears....in a 9"????......
 .....don't think so....3.25.....but not 3.27.I have 3.27 LSD in my ED.....coz I put it there...was a 3.08 single legger.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| brandon89 |
|
||
|
I had a similar question, so from what you guys are saying, if you have say a 3.08 single spinner diff, you could buy some 3.45 or 4.11 ratios and an LSD centre and fit them to your current housing?
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
brandon89 wrote: I had a similar question, so from what you guys are saying, if you have say a 3.08 single spinner diff, you could buy some 3.45 or 4.11 ratios and an LSD centre and fit them to your current housing? Correct.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 36 guests |
