|
| kiwiman |
|
||
|
hi guys, am having trouble changing the rear brake pads on ed monty, the piston wont go back into the callipers. Do they just squeeze back like the front ones, or are they diffrent? have tried to undo nipple that didnt work, have undone the handbrake mechanism as well but with no joy. Any help would be great thanks
_________________ Go hard or go home! Fords Rule! |
||
| Top | |
||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
the piston needs to be wound back into the caliper. There is a tool specifically used to do it that connects to a ratchet.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
here is the tool i bought, from sprints about $36
u can use a pair of vice grips if u are very carefull Attachment: Photo0363.jpg [ 130.22 KiB | Viewed 186 times ] |
|||
| Top | |
|||
| One Drone |
|
|||
|
Or use a g clamp.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
One Drone wrote: Or use a g clamp. the piston needs to be turned back into the caliper at the same time, its threaded |
|||
| Top | |
|||
| One Drone |
|
|||
|
I don't get it, but I haven't had trouble using a g clamp in the middle of the piston.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
if you are using a g clamp and forcing the piston in you are doing things wrong. The piston has to be wound back in. its to do with the handbrake set up.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
ef-el and nf-nl are a different setup, no screwing needed
|
|||
| Top | |
|||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
yep one drone this procedure is only for EA to ED models. Your car has a different brake setup.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Before you go ahead and just change the pads, check the condition of the boots on the caliper pistons, if they look ratty it may be time to get the calipers off and have them overhauled. Inside the caliper are torrigton races and washers that can rust up over time and can make your breaking effort less that optimal.
|
||
| Top | |
||
| One Drone |
|
|||
|
Ah awesome info. Thanks 93EB.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| kiwiman |
|
||
|
thanks guys for your help
_________________ Go hard or go home! Fords Rule! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 36 guests |
