|
| mitchell g |
|
||
|
hey guys, just checking before i get half way though pulling the k frame out of the bush basher,
from what i can see having had a look at the car, theres the 2 bolts at the bottom of the shock tower, the 2 bolts at the front of the chassis rail, and the 4 bolts each side of the up rights, shock bolts and last the steering knuckle is this all that needs to be undone to drop the k frame out of the car? Cheers Mitch |
||
| Top | |
||
| EFFalcon |
|
|||
|
2 per side inside the engine bay physically mounted to the kframe.
1 each side into the chassis rail right near the lower control arm 1 each side at the front of the chassis rail, then the ones you said around the shocks/upper arms/steering
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| mitchell g |
|
||
|
thanks mate, but what does the 4 bolts inside the engine bay where the shock towers do?
|
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
They are for the upper control arms .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| mitchell g |
|
||
|
no not them i know them ones, down the bottom of the shock tower on the inside of the chassis rail
|
||
| Top | |
||
| EFFalcon |
|
|||
|
they hold the kframe to some L brackets, undo those.
you can undo the bolts that go through from the wheel arch instead, but they're normally stupidly tight.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| mitchell g |
|
||
|
ahk i already undid them
 i've undone one shock tower, both shocks and one front bolt off the k frame i dropped all the water so i haven't done the other side yet
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 50 guests |
