Fordmods Logo

manual conversion 

 

Page 1 of 2 [ 17 posts ] Go to page 1, 2  Next

 
 Post subject: manual conversion
Posted: Fri Nov 12, 2004 12:15 am 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

Hey guys im looking at doing a manual conversion..... first of all is the t5 out of a EA,ED,EB interchangable with the EF,EL......
and also does anyone know of a place in Perth that would do this cheaply????
If i cant get it done cheaply i will do it myself... but would rather someone else do it.....

also i assume the tailshaft is the same length in both autos and manuals.

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 12:24 am 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 3519

Joined: 6th Nov 2004

Gallery: 1 images

Ride: BA XR8, XD Fairmont Ghia

Location: Ferntree Gully
VIC, Australia

i assume you have a EF . make sure you get a complete kit from a EF or you could run into problems. pedal boxes & computers ect. are different .
you must change the computer with a EF manual conversion or your fans will run constantly and engine will idle high.
we normally sell the EF manual conversions for $1250
Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 12:26 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 407

Joined: 7th Nov 2004

Gallery: 2 images

Ride: AU series 2 XR8

Location: melbourne
VIC, Australia

does $1250 include the box? is it same price for an el?
Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 12:45 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

s**t thats a good price

yes i woudl assume thast with the box

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 11:53 am 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 812

Joined: 9th Nov 2004

Ride: xr6t

Location: Newcastle
NSW, Australia

i got my conversion for my ea for $700 including a almost new xedy heavy duty clutch, brand new clutch cable and the box only had 160000k's and got it all fitted for $300. Only prob was it didnt include a computer, but its not realy needed for tyhe ea-ed.

 

_________________

Rides:
-Ba xr6t, wog cooler, K&N pod on custom intake, battery moved to other side, flash, custom cooler piping, presons auto, car pc, 19" lenso speed 6, going for 300rwkw
-FZR 250- run around bike

Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 12:27 pm 
Stock as a Rock
Offline

Posts: 139

Joined: 8th Nov 2004

Gallery: 4 images

Location: Meeka, Coonland
WA, Australia

as far as the thermo's are concened all you need to do is put in a 1650ohm resistor between the temp sensor wires on the auto wiring loom. You do not have to purchase a new computer.

 

_________________

They say people don't believe in heroes anymore. Well damn them! You and me, Max, we're gonna give them back their heroes!

Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 1:24 pm 
Getting Side Ways
Offline

Posts: 1687

Joined: 5th Nov 2004

Gallery: 5 images

Ride: 1994 ED Ricer

Location: Perth
WA, Australia

i know a guy who is wrecking an EA with a 5speed manual. Pm me and ill give u his number, he used to be a member on fordmods but he doesnt have access to his computer anymore. (EFJASE or JASE)
i know he wants to get rid of stuff cheap so it would be worth a short to give him a buzz and see how much he wants for it.
Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 11:40 pm 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

hey XR8 dismatler...... im pretty interested in your manual conversion kit....... do these kits come with warranty??? if so how long for????? and how much would it be to get it freighted to perth u rekon??????

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 11:52 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 3519

Joined: 6th Nov 2004

Gallery: 1 images

Ride: BA XR8, XD Fairmont Ghia

Location: Ferntree Gully
VIC, Australia

elXR wrote:
does $1250 include the box? is it same price for an el?


yes it includes the box . EL conversions are different again as you need to change the engine wiring loom. they dont have a removable loom running to the gearbox.

i have a conversion coming in of tuesday its in a ef xr6 the price including computer will be $1500

be carfull of the ea conversions smaller clutch weaker box spend the $$$$ and get the right thing first time!
Top
 Profile  
 
 
Posted: Fri Nov 12, 2004 11:57 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 3519

Joined: 6th Nov 2004

Gallery: 1 images

Ride: BA XR8, XD Fairmont Ghia

Location: Ferntree Gully
VIC, Australia

oh yeh and azza freight to perth about $100-150 i would have to do some ringing around for the best price. as for a warranty whats that? its guaranteed to be good. we dont offer a warranty for performance cars .
Top
 Profile  
 
 
Posted: Sat Nov 13, 2004 2:18 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 11788

Joined: 5th Nov 2004

Gallery: 13 images

Ride: Holden VF Calais / NL FBT

Location: SE Melb
VIC, Australia

EF 4.9 wrote:
as far as the thermo's are concened all you need to do is put in a 1650ohm resistor between the temp sensor wires on the auto wiring loom. You do not have to purchase a new computer.

is this on pin30 on the ecu for the trans temp line?

 

_________________

Nicko

Top
 Profile  
 
 
Posted: Sat Nov 13, 2004 2:20 am 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

100-150 sounds alright
i will have to talk to u again soon as i want to have bit of money in reserve for this conversion just incase something goes wrong...... how often are these kits available????? shouldnt be any longer than a month

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
 
Posted: Sat Nov 13, 2004 3:30 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 927

Joined: 6th Nov 2004

Ride: BA Falcon EGas

Location: Perth
WA, Australia

in perth, Walliston wreckers got my mate (Fast Futura on fordmods) an EF box and computer for $1300 or INSTALLED I think not including clutch. Definately worth doing there. I've driven the car and looked at the job and they know what they're doin. It was recommended to him by someone off fordmods.

 

_________________

BA Falcon Futura on EGas. Stock as...

EF 5 speed manual; PH 4480 Pacemaker Headers; 2 1/2" Lukey Mandrel Bent System; Hi Flow Walker Cat; Stage 3 Crow Cam; ChipTorque Chip; 3" Mandrel Bent Intake; K&N Pod Filter; Low Pedders Suspension; 17" EL GT Champagne Rims; RPM Series Clutch

Top
 Profile  
 
 
Posted: Sat Nov 13, 2004 3:31 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 927

Joined: 6th Nov 2004

Ride: BA Falcon EGas

Location: Perth
WA, Australia

By the way, shouldn't this get moved to the driveline forum? Its not really an engine question.

 

_________________

BA Falcon Futura on EGas. Stock as...

EF 5 speed manual; PH 4480 Pacemaker Headers; 2 1/2" Lukey Mandrel Bent System; Hi Flow Walker Cat; Stage 3 Crow Cam; ChipTorque Chip; 3" Mandrel Bent Intake; K&N Pod Filter; Low Pedders Suspension; 17" EL GT Champagne Rims; RPM Series Clutch

Top
 Profile  
 
 
Posted: Sat Nov 13, 2004 2:44 pm 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

yeh i have heard some good reports about that Walistone wreckers place..... and they do some really cheap prices also.... i think i might give them a buz....they advertised not long ago in the Quokka a conversion for 1500 drive in drive out
sorry about posting in wrong section

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 17 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google Adsense [Bot] and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Apr 25, 2024 4:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names