Fordmods Logo

manual ecu with manual conversion 


Page 1 of 1 [ 3 posts ] 

 Post subject: manual ecu with manual conversion
Posted: Mon Aug 11, 2008 3:38 pm 
Oompa Loompa

Age: 39

Posts: 37

Joined: 28th May 2008

Location: melbourne
VIC, Australia

Ok i'm just about finnished my manual conversion i put a manual ecu in instead of using the auto one.Anyway when i started breifly for half a min to a minute my car was running rough now am i right in thinking that it was running rough as the manual computer has to tune all in to the car.I know when i had bombadores that when i would re-place the stock memcal with a performance one the car would idle alot faster and run quite rough for about 5 to 10 minutes until it tuned itself in.Now do the fords Eseries do the same type of thing when changing the ecu to a manual ECU or just putting a differant ECU in all togeather
Posted: Mon Aug 11, 2008 5:02 pm 
Fordmods Newbie

Age: 29

Posts: 9

Joined: 19th Nov 2006

Location: gembrook....
VIC, Australia

yes, they have to relearn so will run rough for a while, then it will settle down, sometimes they stall etc, pretty standard

Posted: Mon Aug 11, 2008 9:19 pm 
Getting Side Ways

Age: 29

Posts: 1135

Joined: 27th Oct 2005

Gallery: 3 images

Location: SA
SA, Australia

Yep totaly normal mate, dont be surprised if its like it for a couple of days. When i converted my ef it was ok luckily. But when i changed my cam it was a pig to drive for a couple of days.
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



It is currently Thu May 24, 2018 5:47 pm All times are UTC + 11 hours



(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names