Fordmods Logo

mini spool?????? 

 

Page 3 of 3 [ 42 posts ] Go to page Previous  1, 2, 3

 
 Post subject: Re: mini spool??????
Posted: Sat Mar 09, 2013 9:24 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

spools are fine. My brother has had like 6 cars with lockers in them. For skids, LSDs are s**t, had a fully rebuilt on in my EB. Last 10 months tops. My turbo SVO is going a full spool.

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Sat Mar 09, 2013 9:56 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 1832

Joined: 3rd May 2007

Gallery: 8 images

Ride: AUII XR6 Uterus

Location: South Coast
NSW, Australia

once again, big difference between locker and spool... lockers can be had for under $300 & can still navigate corners.

 

_________________

Not to get technical, but according to chemistry alcohol is a solution.

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Sun Mar 10, 2013 11:11 am 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

low_ryda wrote:
once again, big difference between locker and spool... lockers can be had for under $300 & can still navigate corners.

welded diffs and spools. They all get called the same. If the centre has moving parts, then can wear out and brake.
Eliminate that by a spool, mini spools can flog out the pins, hence why i went a full spool

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Sun Mar 10, 2013 12:20 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 591

Joined: 28th May 2011

Gallery: 4 images

Ride: EF Futura DUH

Location: central coast
NSW, Australia

I think he means a mechanical locker.
I would love a spool. Not too keen on being defected or snapping axles though.

If I had the dosh i'd fork out the $1500 odd for a tru trac centre.

 

_________________

1996 EF Futura factory manual
Fully rebuilt engine,Decked, Honed, Bored, Tolerences spot on, Wade 1673, Extractors, 2.5" zorst, 3" CAI, High flow filter, Exedy sports tuff clutch, Chiptorque tune.
Future Mods: A mortgage...

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Sun Mar 10, 2013 1:07 pm 
Getting Side Ways
Offline
User avatar

Posts: 901

Joined: 28th Apr 2011

Gallery: 18 images

Ride: 1997 EL XR6

Power: 180 rwkw

Location: Melbourne
VIC, Australia

EFFUTURA4.05SP wrote:
I think he means a mechanical locker.
I would love a spool. Not too keen on being defected or snapping axles though.

If I had the dosh i'd fork out the $1500 odd for a tru trac centre.


Tru Trac for the win!

 

_________________

MGW Short Throw Shifter, CVE Cam, CVE Head, SS Big Mouth Air Intake, Pacemaker Headers, 3" Exhaust, 3" Varex, 3" Cat, 19" Silver Agents, EMS Stinger 4424, 42lb Injectors and Walbro 255lb Fuel Pump

Next: Pacemaker Comps, 6 Individual Throttle Bodies, ICE Coil and ignition

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Sun Mar 10, 2013 7:00 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

with the amount of welded diffs/spools my brother has had, he has snapped one axle. I like those odds

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Sun Mar 10, 2013 8:18 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 591

Joined: 28th May 2011

Gallery: 4 images

Ride: EF Futura DUH

Location: central coast
NSW, Australia

I barely have time to maintain my car these days let alone swapping diffs to clear a defect, plus, these days I rarely drive in a manner that would warrant a locked diff.

Take away all the negatives and I would smash one in tomorrow.... I must be getting old.... :lol:

 

_________________

1996 EF Futura factory manual
Fully rebuilt engine,Decked, Honed, Bored, Tolerences spot on, Wade 1673, Extractors, 2.5" zorst, 3" CAI, High flow filter, Exedy sports tuff clutch, Chiptorque tune.
Future Mods: A mortgage...

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Sun Mar 10, 2013 8:27 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 1832

Joined: 3rd May 2007

Gallery: 8 images

Ride: AUII XR6 Uterus

Location: South Coast
NSW, Australia

yes I was referring a mechanical locker, it allows both wheels to spin at different speeds around corners. That's what snaps axles in 'cig lockers' and spools, one wheel trying to slow the other down, hence the low speed chirp & sketchy handling in the wet.

 

_________________

Not to get technical, but according to chemistry alcohol is a solution.

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Sun Mar 10, 2013 8:35 pm 
Getting Side Ways
Offline

Age: 35

Posts: 4183

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia

I'll be forking out the required cash for a true Trac before I fit another Spool to a street car.....

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

OO0Y4 - BA2 XR6 Turbo, Nizpro Plenum, Process West stage 3 cooler, 4” dump, 3.5” exhaust, ID1000’s, ZF Auto - 11.8@116

Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Mon Mar 11, 2013 10:10 am 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

ah well, everyone has their opinion. The SVO is copping a full spool. It'll be a straight line car anyway, not like it'll get driven often with the way cops are around here.

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re:
Posted: Thu Apr 11, 2013 9:18 pm 
Fordmods Newbie
Offline

Age: 44

Posts: 7

Joined: 4th Nov 2012

Ride: XR6 AU II 2001

Location: blair athol
SA, Australia

sickd wrote:
a spool is as dangerous as a new lsd, so if you know how to drive it wou;ld be fine also as some one said its more predictable which is also safer, every C*** is just sooking cos its illegal, any C*** who cant drive is gonna crash with or with out a lsd so who cares its there own fault.


any one with 18" wheels on there standard falcon that came out with 15' rims has an illegal car its dangerous.



Anything over 17inch tyres is only compromising ride/ performance for looks anyway... I personally think anyone with 18" up rims are just show boaters to be honest...People just need to look at the V8 supercars.. All that horspower and performance and still running 17's for handling / performance ;)
Top
 Profile  
 
 
 Post subject: Re: mini spool??????
Posted: Fri Apr 12, 2013 9:59 am 
Smokin em up
Offline

Age: 43

Posts: 298

Joined: 3rd Mar 2012

Ride: NL Fairlane Ghia V8

Location: Geelong
VIC, Australia

This years cars are running 18's. Oops lol
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 3 of 3  [ 42 posts ]  Go to page Previous  1, 2, 3

Who is online

Users browsing this forum: No registered users and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 26, 2024 9:25 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names