|
| Zombiehead19 |
|
||
|
Hi all,
just wondering if someone could explain to me the process of swapping out my fairlanes auto box for a manual. what car will the manual box and other parts have to come from, and what parts will i need to complete the conversion. your assistance is greatly appreciated. have never done a conversion before, only engine work, so this is all new to me. thanks again. |
||
| Top | |
||
| fezlane |
|
|||
Age: 57 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
You can get all parts from any e series manual.
You will need gearbox flywheel spigot bearing bellhousing clutch throw out bearing clutch pressure plate manual pedal box or mal wood clutch pin kit clutch cable clutch return spring j3 chip or resistor trick to fool ecu modified auto wiring harness or a manual harness I thinkk thats about it Look through technical section on here for full info on how to do swapover or fordforums. Good Luck |
|||
| Top | |
|||
| Zombiehead19 |
|
||
|
Thanks for your help. Unfortunately i can't find the swap over document. Could u help? Tjanks
|
||
| Top | |
||
| fezlane |
|
|||
Age: 57 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
||||
| Top | |
|||
| Zombiehead19 |
|
||
|
Thanks so much that's a big help
|
||
| Top | |
||
| Zombiehead19 |
|
||
|
A bit unrelated, but how many camshaft are in the windsor v8? Cheers
|
||
| Top | |
||
| fezlane |
|
|||
Age: 57 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
1
|
|||
| Top | |
|||
| Zombiehead19 |
|
||
|
Wow really!? That's too easy then... I would've thought it was quad cam. Thanks for your help.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
