|
| AdamN |
|
||
|
Try jaycar or altronics... you can get everything you want from them.. and they even deliver if so choose.
|
||
| Top | |
||
| stiffi |
|
||
|
ok ive read over this and love the idea i went and got the parts although there where no 10watts so i got 2 5 watts to match it bla bla
but i read over this topic and saw this was already brought up but the answer didnt really lead to anywhere. if join them together to make 10 watts will it double the ohms as well? or more importanly will it work if i join both together to make 10 watts? |
||
| Top | |
||
| xf_xr6 |
|
||
|
I tried this in my car (el). After a few months the gearbox shat its self and had to get a full rebuild.
Has anyone else had reliability issues? It was fun while I had it though... |
||
| Top | |
||
| jim_reaper |
|
||
|
use the two resisters in parralel and it will double wattage and halve the ohms.
eg to get the equivelant of 10 16ohm you need 2x 5W 32ohm in parralel with each other |
||
| Top | |
||
| MooseMan |
|
|||
|
Im utterly hopeless with a soldering iron. Last time I used one was year 7 electronics at school and im pretty sure I failed. Anyone want to help me out and put one in for me in northern suburbs of melbourne?
_________________
|
|||
| Top | |
|||
| MooseMan |
|
|||
|
DELETE ME F.A.GS!
_________________
|
|||
| Top | |
|||
| stomper |
|
|||
|
MooseMan wrote: Im utterly hopeless with a soldering iron. Last time I used one was year 7 electronics at school and im pretty sure I failed. Anyone want to help me out and put one in for me in northern suburbs of melbourne?
Deposit $35 into my acount and ill build you one and post it over to you. I built them before and i have almost finished the doco on it. You can install you self, as long as you know how to read a number higher then 10 and know where a ecu is. You dont have to solder it to the ECU because u maybe beable to crimp it in. EASY
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| shoey50 |
|
||
|
so has anyone managed to make one with an on and off light?
|
||
| Top | |
||
| stomper |
|
|||
|
shoey50 wrote: so has anyone managed to make one with an on and off light?
YEP I done it. Ill get some photos up when i have a chance. I used a DPDT switch. 3 of the ples were used for the shift kits its self. The other 3 i put 12v + in to the middle then on the outer poles i had a superbright green LED with a resistor and a red LED for off. That way when the shift kit is on it is Green and bright and you know about it. When it is off its red and not so bright.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| shoey50 |
|
||
|
wicked do ya think you could chuck up a bit of i diagram if you havnt already i really wanna but a light on cheers mate
|
||
| Top | |
||
| stomper |
|
|||
|
Make sure you put a 560ohm resistor in the redpower line. Without this you will burn the LED's
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
neby hear hi guyd made one of these kits today the great but i wouldnt mine a bit harder shift any idias on what resistors to change to
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| stomper |
|
|||
|
EF/EL bump the 5.6ohm up slightly. That will make it firmer IIRC.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
whats slightly to a 6.0 or higher ?
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
a mate of mine has a auxr8 is the set up the same at the ecu as in 71 and 81 wires to use ?
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
