|
| michael1045 |
|
||
|
when doing a manual concersion why do you have to get a new spigot bearing
cant you just use the 1 from when the auto was there |
||
| Top | |
||
| Froudey |
|
||
|
the bearing is in the manual not in an auto ( i assume)
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Krytox |
|
|||
|
You don't need a new one! you NEED ONE preferable thats new!
Auto boxes don't require a spigot bearing installed into the crank. The manual input shaft inserts into the crank for support and thrust reasons. The auto seats in the torque convertor. Thus, needs one. Buy a Genuine one.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ilovmel |
|
||
|
depends if the motor has a bearing on it some have them on them regarlees if maunal or auto
_________________ i am in need of a new front bar or good condation secondhand for a 95 ef futra,
|
||
| Top | |
||
| Krytox |
|
|||
|
very true, some from factory have the bearing.
however I'd replace it nonetheless as the grease would have come out.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ilovmel |
|
||
|
because i did a convet on an el and it had a bearing allready there
_________________ i am in need of a new front bar or good condation secondhand for a 95 ef futra,
|
||
| Top | |
||
| rushed |
|
|||
|
when doing a mod like this, do it right, buy new parts. saves you issues in the long run.
|
|||
| Top | |
|||
| naughtyfalcon |
|
|||
|
auto's have a cup looking thing on the converter..
_________________
|
|||
| Top | |
|||
| michael1045 |
|
||
|
do most spare parts shops have these in stock or do they have to order them in
|
||
| Top | |
||
| michael1045 |
|
||
|
does anyone have a picture of this bearing and where it goes
i am hoping my car already has one it is an auto el gli |
||
| Top | |
||
| Dansedgli |
|
||
|
from ford $15 odd i think i paid.
|
||
| Top | |
||
| naughtyfalcon |
|
|||
|
highly unlikely it would,,,if you've ever seen the bearing for idlers on the engine,,the spigot is almost the same and goes in the end of the crank shaft....
_________________
|
|||
| Top | |
|||
| michael1045 |
|
||
|
ilovmel Posted: Thu Jun 07, 2007 9:22 pm Post subject:
-------------------------------------------------------------------------------- because i did a convet on an el and it had a bearing allready there Krytox Posted: Thu Jun 07, 2007 9:15 pm Post subject: -------------------------------------------------------------------------------- very true, some from factory have the bearing. however I'd replace it nonetheless as the grease would have come out. ilovmel Posted: Thu Jun 07, 2007 9:08 pm Post subject: -------------------------------------------------------------------------------- depends if the motor has a bearing on it some have them on them regarlees if maunal or auto i thought that mine woud be the same could i just use the old one if it was still ok |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
