Fordmods Logo

Home » Forums » Fordmods Tech » Gearbox, Suspension, Brake & Driveline Workshop

Whipe pipe to disconnect to drain and flush transmission? 

 

Page 1 of 1 [ 7 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
bry40l
 Post subject: Whipe pipe to disconnect to drain and flush transmission?
Posted: Sat Jan 15, 2011 2:00 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
Which pipe do I disconnect to do a full flush and how much fluid does the whole system hold from empty to full

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
89.SVO
 Post subject: Re: Whipe pipe to disconnect to drain and flush transmission?
Posted: Sat Jan 15, 2011 2:31 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia
to do a decent flush if the fluid is black you'll need like 15L.

remove the trans cooler pipe and have the cooler side and the trans side of the lines going into a catch container.

the question is do you know the procedure to do it correctly?

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph
Top
 Profile  
 
 
tickford_6
 Post subject: Re: Whipe pipe to disconnect to drain and flush transmission?
Posted: Sat Jan 15, 2011 2:33 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004
you need to take off both pipes from trans cooler.

One goes in to a 30L container the other connects to your drum pump.
You'll to buy a 20L container of BTR compatible fluid and drum pump to suit.


First you do a pan change like normal, then refill and connect the drum pump to the return line.
(put both pipes into the catch container and run the engine for a few seconds, that will show which pipe is which)

Then while you friend sits in the car and runs the engine and moves the shifter through all the gears, you need to pump in the new fluid untill what comes out is clean. Try and save a few litres so you have some to adjust the level when your done.
Top
 Profile  
 
 
Disco Frank
 Post subject: Re: Whipe pipe to disconnect to drain and flush transmission?
Posted: Sat Jan 15, 2011 2:35 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia
and dont u need a pump to pump to pump the new fluid in as well?

 

_________________

RIP SCOTT
Top
 Profile  
 
 
bry40l
 Post subject: Re: Whipe pipe to disconnect to drain and flush transmission?
Posted: Sat Jan 15, 2011 2:41 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
Oki doki I can manage that thanks

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
89.SVO
 Post subject: Re: Whipe pipe to disconnect to drain and flush transmission?
Posted: Sat Jan 15, 2011 3:34 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia
don't need a drum pump. just do the pan gasket and filter, fill it up. have the lines into a catch container, start it, run it through the gears till it runs outta fluid. top up, repeat till it's clean. put the trans coller line back on, fill to right level. all done

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph
Top
 Profile  
 
 
bry40l
 Post subject: Re: Whipe pipe to disconnect to drain and flush transmission?
Posted: Sat Jan 15, 2011 4:37 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
Yea thats all I thought id need to do, thanks

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 7 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » Gearbox, Suspension, Brake & Driveline Workshop

Who is online

Users browsing this forum: No registered users and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 27, 2024 9:13 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names