Fordmods Logo

Dan's AU ute 282rwkw + LS1 T56 

 

Page 4 of 26 [ 386 posts ] Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 26  Next

 
 Post subject: Re: Dan's supercharged ute
Posted: Thu Feb 25, 2010 4:17 pm 
Getting Side Ways
Offline

Age: 34

Posts: 3406

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

193.8rwkw at 5psi.

It needs more boost but its a good start. The stock intake pipe sucked 20rwkw out of the power figure so Ill get something better made up.

Video of dyno run.

http://www.youtube.com/watch?v=X13KfnoE19U

Image
Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 4:30 pm 
Getting Side Ways
Offline

Posts: 5582

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

s**t YEAH!!!!!!

And look at that fat flat torque curve.

I want one!!!!

Good result Dan.

Cheers
BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 5:09 pm 
Fordmods Junkie
Offline
User avatar

Age: 35

Posts: 3045

Joined: 26th Nov 2008

Ride: 1975 XB Falcon 500

Location: In the drivers seat
SA, Australia

BenJ wrote:
s**t YEAH!!!!!!

And look at that fat flat torque curve.

I want one!!!!

Good result Dan.

Cheers
BenJ


+1 mate

That whines nicely :lol:

Im not that knowledgeable on the whole thing, but what will you need to do to get more boost? smaller pulley to get the thing spinning quicker?

Cheers
Josh

 

_________________

Image
http://www.facebook.com/Ford1975

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 5:16 pm 
Getting Side Ways
Offline

Age: 34

Posts: 3406

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

Yeah I need a smaller pulley. The stock intake is rubbish as well. That 193 was with it removed. It made 173ish with it fitted.

The next thing will be a 3 inch intake pipe and a pod filter under the guard for fresh air. Then when I get bored Ill change pullies and go for a retune.

I want to let the bank account rest for a little while though and I have been looking forward to not working on the car. :P
Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 5:19 pm 
Getting Side Ways
Offline

Posts: 2410

Joined: 4th Sep 2006

Location: Sydney
NSW, Australia

inpressive stuff there

 

_________________

Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color]

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 5:26 pm 
Fordmods Junkie
Offline
User avatar

Age: 35

Posts: 3045

Joined: 26th Nov 2008

Ride: 1975 XB Falcon 500

Location: In the drivers seat
SA, Australia

Dansedgli wrote:
Yeah I need a smaller pulley. The stock intake is rubbish as well. That 193 was with it removed. It made 173ish with it fitted.

The next thing will be a 3 inch intake pipe and a pod filter under the guard for fresh air. Then when I get bored Ill change pullies and go for a retune.

I want to let the bank account rest for a little while though and I have been looking forward to not working on the car. :P


Yeah that all sounds good mate.

Are you worried about it looking stock? because you might be able to run the 3 inch pipe through the whole airbox and under the where you intend to have the pod.

 

_________________

Image
http://www.facebook.com/Ford1975

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 5:32 pm 
Getting Side Ways
Offline

Age: 34

Posts: 3406

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

Nah not really worried about it looking stock but thats a good idea. I might do that. The airbox and a black 3 inch intake pipe would look pretty good.
Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 6:12 pm 
Fordmods Junkie
Offline
User avatar

Age: 35

Posts: 3045

Joined: 26th Nov 2008

Ride: 1975 XB Falcon 500

Location: In the drivers seat
SA, Australia

Dansedgli wrote:
Nah not really worried about it looking stock but thats a good idea. I might do that. The airbox and a black 3 inch intake pipe would look pretty good.


Im not meaning putting the pod in the airbox. just having the pipe pass through the whole airbox for looks.

Just making sure, as im not sure if i was clear in my last post.

Cheers

 

_________________

Image
http://www.facebook.com/Ford1975

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 6:24 pm 
Getting Side Ways
Offline

Age: 34

Posts: 3406

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

Yeah, you were clear. Similar to what DCstraight has done with his cooler piping.
Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 7:48 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11739

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

Nice work Dan :D...nice figures and a nice whine...if only I have the money I would try something similar.

Also with the intake, you could try something similar like mine? 3" stainless steel piping from stock intake box to TB with a silicone hose to connect to the TB of course. One whole piece.

Image

I had a bit of clearance issues at first, but after cutting down one of the mounting points for the stock intake I cleared the bonnet. You might be able to squeeze it into place since your TB to supercharger seems to be about the same height as a BBM.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 9:47 pm 
Getting Side Ways
Offline

Age: 29

Posts: 2563

Joined: 19th Feb 2007

Gallery: 21 images

Ride: 98 EL Futura

Power: 199 rwkw

Location: Lilydale
VIC, Australia

That sounds awesome and 193rwkw at 5psi is heaps.

 

_________________

EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Feb 25, 2010 9:55 pm 
SA Cruise Moderator
Offline
User avatar

Age: 28

Posts: 916

Joined: 7th Oct 2007

Ride: Ford Ed

Location: Edwardstown, Adelaide
SA, Australia

Mate that is just insane! Top work!!

Any chance on a drive by video :D

 

_________________

Adelaide E Series

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Mon Mar 01, 2010 3:32 pm 
Getting Side Ways
Offline

Age: 34

Posts: 3406

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

Nah dont have a driveby vid.

Ill hold off on the intake until I get a smaller pulley. We are thinking that the stock T/B might be a restriction as the lightning T/B is twin 57mm. When Geoff had this kit on his ED with the stock lightning t/b it was making more boost.

If it can make 8-9 psi with the standard t/b Ill leave it but if it cant Ill change to a bigger t/b which means a different intake. The throttle body will likely end up facing forward and I would have to use an earlier throttle cable. I'd like to keep the standard stuff if possible.
Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Mar 11, 2010 9:50 am 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 3184

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia

Dan, hows it going now that you've had it in for a few weeks? Good?

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319

Top
 Profile  
 
 
 Post subject: Re: Dan's supercharged ute 193rwkw
Posted: Thu Mar 11, 2010 10:05 am 
Getting Side Ways
Offline

Age: 34

Posts: 3406

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

Yeah all good.

I havent had any issues at all.

Geoff is sending out the intake off his old ED and Ill put that on to see if it makes a difference to boost levels. He still thinks I should be making around 7 or 8psi and Im only getting 5.

Once the throttle body is sorted Ill put a proper intake pipe on it.

Ive got a smaller pulley to go on as well which should raise the boost 2 or so psi so hopefully it can run 9 or 10 psi all up once its sorted.

That should give me around 220 - 230rwkw which should be fun.

Other than that I dont plan to do anything to it and its back to saving up a house deposit. :(
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 4 of 26  [ 386 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 26  Next

Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 15, 2017 3:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names