|
| Dansedgli |
|
||
|
Do the sedan ones look like what is in an E series?
Looking at the BA forums the ute's are supposed to have less trouble with fuel surge so the cradle seems like a good thing. |
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: Do the sedan ones look like what is in an E series? Looking at the BA forums the ute's are supposed to have less trouble with fuel surge so the cradle seems like a good thing. au sedan is similar looking to e series , but not the same... |
||
| Top | |
||
| Dansedgli |
|
||
|
Injectors and 2 bar map sensor fitted. I also got my flash tuner last night with a base tune.
It runs but not really well. It hit about 5psi on my trip around the block. Hopefully it can put out more than that once its tuned.  
|
||
| Top | |
||
| huggiebear |
|
|||
|
how does it sound? im keen to hear how it goes
|
|||
| Top | |
|||
| Dansedgli |
|
||
|
Its not loud at all. I couldnt hear it whining on my trip around the block.
Its like driving a big V8. No lag. Hopefully it all goes ok tomorrow. My engine spat a bit of oil out of the breathers but Im hoping that is just because I forgot to hook up the breather and not because its dying. Thinking positive. 
|
||
| Top | |
||
| Dansedgli |
|
||
|
193.8rwkw at 5psi.
It needs more boost but its a good start. The stock intake pipe sucked 20rwkw out of the power figure so Ill get something better made up. Video of dyno run. http://www.youtube.com/watch?v=X13KfnoE19U 
|
||
| Top | |
||
| BenJ |
|
||
|
s**t YEAH!!!!!!
And look at that fat flat torque curve. I want one!!!! Good result Dan. Cheers BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| XR-Lane |
|
|||
|
{USERNAME} wrote: s**t YEAH!!!!!! And look at that fat flat torque curve. I want one!!!! Good result Dan. Cheers BenJ +1 mate That whines nicely  Im not that knowledgeable on the whole thing, but what will you need to do to get more boost? smaller pulley to get the thing spinning quicker? Cheers Josh |
|||
| Top | |
|||
| Dansedgli |
|
||
|
Yeah I need a smaller pulley. The stock intake is rubbish as well. That 193 was with it removed. It made 173ish with it fitted.
The next thing will be a 3 inch intake pipe and a pod filter under the guard for fresh air. Then when I get bored Ill change pullies and go for a retune. I want to let the bank account rest for a little while though and I have been looking forward to not working on the car.
|
||
| Top | |
||
| MICKYYYY |
|
||
|
inpressive stuff there
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| XR-Lane |
|
|||
|
{USERNAME} wrote: Yeah I need a smaller pulley. The stock intake is rubbish as well. That 193 was with it removed. It made 173ish with it fitted. The next thing will be a 3 inch intake pipe and a pod filter under the guard for fresh air. Then when I get bored Ill change pullies and go for a retune. I want to let the bank account rest for a little while though and I have been looking forward to not working on the car. Yeah that all sounds good mate. Are you worried about it looking stock? because you might be able to run the 3 inch pipe through the whole airbox and under the where you intend to have the pod. |
|||
| Top | |
|||
| Dansedgli |
|
||
|
Nah not really worried about it looking stock but thats a good idea. I might do that. The airbox and a black 3 inch intake pipe would look pretty good.
|
||
| Top | |
||
| XR-Lane |
|
|||
|
{USERNAME} wrote: Nah not really worried about it looking stock but thats a good idea. I might do that. The airbox and a black 3 inch intake pipe would look pretty good. Im not meaning putting the pod in the airbox. just having the pipe pass through the whole airbox for looks. Just making sure, as im not sure if i was clear in my last post. Cheers |
|||
| Top | |
|||
| Dansedgli |
|
||
|
Yeah, you were clear. Similar to what DCstraight has done with his cooler piping.
|
||
| Top | |
||
| phongus |
|
|||
|
Nice work Dan
 ...nice figures and a nice whine...if only I have the money I would try something similar.Also with the intake, you could try something similar like mine? 3" stainless steel piping from stock intake box to TB with a silicone hose to connect to the TB of course. One whole piece.  I had a bit of clearance issues at first, but after cutting down one of the mounting points for the stock intake I cleared the bonnet. You might be able to squeeze it into place since your TB to supercharger seems to be about the same height as a BBM.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
