Fordmods Logo

ef2 xr8 manual photo's and dyno 

 

Page 1 of 1 [ 3 posts ] 

 
 Post subject: ef2 xr8 manual photo's and dyno
Posted: Mon Nov 29, 2010 8:06 pm 
Fordmods Newbie
Offline

Age: 45

Posts: 5

Joined: 28th Nov 2010

Ride: ford falco ef2 xr8

Location: wanganui
New Zealand

hi got my self a ef2 xr8 manual , looking at making some more mod,s. so i started with a dyno to see where i am. first dyno made 176.5rwhp.

Image

after that i fitted some m&h headers with sport exhaust , replaced the air flow meter as it was in the low 10.1 ratio which is to low making it run to rich and replace spark plugs , fuel filter , drilled hole at the bottem of the air box , and re-set the timing. went back for a dyno.

Image

Image

now like to made some more mod's but not sure where to go next. if you have any ideas or know how please help. here's some photo's off my car.

Image

Image

Image
Top
 Profile  
 
 
 Post subject: Re: ef2 xr8 manual photo's and dyno
Posted: Tue Nov 30, 2010 8:37 pm 
Getting Side Ways
Offline
User avatar

Age: 29

Posts: 1700

Joined: 24th Nov 2005

Gallery: 12 images

Ride: DCII LTD V8

Location: Dunedin
New Zealand

That's some pretty sweet power output there!

Up next i would HIGHLY recommend getting some underdrive pulleys, you will notice a big difference.

You can get them for about $205 delivered, but you will have to get a new bolt pattern drilled to suit the water pump. If you get Blue Oval Industries' pulleys the alternator pulley fits straight on with no mod.

Get an explorer (AU XR8) intake manifold set and throttle body.

 

_________________

1993 LTD V8 Oregon 5 speed "click me"

Trick Flow Heads/Cam/Intake, Crane Ignition, T5Z Trans.

Top
 Profile  
 
 
 Post subject: Re: ef2 xr8 manual photo's and dyno
Posted: Wed Dec 01, 2010 7:33 am 
Fordmods Newbie
Offline

Age: 45

Posts: 5

Joined: 28th Nov 2010

Ride: ford falco ef2 xr8

Location: wanganui
New Zealand

yes was looking at under drive pulleys and was also thinking of a 75mm air flow meter as well. will like to know more about the ecu and what chip would be best. with upper and lower manafold was going to port them out a bit frist and then go form there.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 11, 2017 11:45 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names