|
| my347 |
|
||
|
Its gonna be roughly 15-20 for the engine then another 15+ for engine management plus fitting and tuning
_________________ SIGNATURE PIC TO LARGE... REMOVED BY MODERATOR! |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Let me tell you it will be 15-20 for parts for the engine, then 8-10 on top of that to assemble it. Thats before it even goes into the bay. I dont want to put you off, but just be aware that what ever you have budgetted for it, double it to be safe.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| my347 |
|
||
|
Thanks for the info Brett, haven't really set a budget as i know that the engine is only part of the process, still got trans, diff, driveshaft, axels, body strengthening and other mods on top of that. while i do the engine i will be getting the car respayed plus a full interior overhaul. overall budget is prob about $100,000 so roughly got anywhere up to 60 for the engine. aiming for a full show car that whips anything down the 1/4 and can still be driven down the shops
_________________ SIGNATURE PIC TO LARGE... REMOVED BY MODERATOR! |
||
| Top | |
||
| MICKYYYY |
|
||
|
I got quoted up for 20k so thats Dart block, AFR 225 heads and the works, so from intake manifold to HV sump 20K then another 10k for Autonic SM4 and ignition components installed and tuned, alloy radiator a few other fidly things in the engine bay.
So 30-33k is for everthing in the engine bay complete tuned and running plus the rest HAHAHAHA We boys have a expensive hobby Have you considered getting all your engine parts from the states??? I'll be considering www.summit.com as they seem to be relaible and trustworthy.
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| banarcus |
|
|||
|
I assume that you guys talking the big bucks here drive in and drive out for that price? It aint rocket science bolting a bottom end together.
|
|||
| Top | |
|||
| my347 |
|
||
|
MICKYYYY, gonna get discuss with the engine builder about the settup then purchase parts myself and take it all to them to build, install and tune. allready ordered the block and it is on its way from summit as we speak
Banarcus, we are not talking about building 200hp toy engines, when your talking 500+ hp and $30k+ engines i would prefer it to build by a professional. if it was just a rebuild of current engine i would do myself as i spent my teen years building 351 clevos with my older brother
_________________ SIGNATURE PIC TO LARGE... REMOVED BY MODERATOR! |
||
| Top | |
||
| MICKYYYY |
|
||
|
My347
Thats awsome, let me know via here or pm on taxes and so on and how it was to deal with summit. Look's like its better to get parts from the states when our dollar is strong so u can save money which can go 2 other things.
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| my347 |
|
||
|
Bought a few things from them before and they are great to deal with, once it hits our shores i will yet you know on import taxes.
_________________ SIGNATURE PIC TO LARGE... REMOVED BY MODERATOR! |
||
| Top | |
||
| my347 |
|
||
|
Thought i would post a front on pic of the engine.
_________________ SIGNATURE PIC TO LARGE... REMOVED BY MODERATOR! |
||
| Top | |
||
| Scaffy |
|
|||
|
MICKYYYY wrote: Look's like its better to get parts from the states when our dollar is strong so u can save money which can go 2 other things.
I'm sorry to say that our dollar is s**t-house now and whether you buy your parts from a shop or from the states, you're going to be paying big bucks either way. The aussie dollar dropped 7c overnight! If your block is on the way now, then you were probably lucky enough to order it with a reasonable exchange rate. I'll be keeping an keen eye on this build. Good work MY347.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| banarcus |
|
|||
|
my347 wrote: MICKYYYY, gonna get discuss with the engine builder about the settup then purchase parts myself and take it all to them to build, install and tune. allready ordered the block and it is on its way from summit as we speak
Banarcus, we are not talking about building 200hp toy engines, when your talking 500+ hp and $30k+ engines i would prefer it to build by a professional. if it was just a rebuild of current engine i would do myself as i spent my teen years building 351 clevos with my older brother I'm sorry for sounding like a d**k. Whether you're talking about $3000 alloy heads or cast iron E7s, the same principles apply. Also goes for the big dollar pistons and rods too and anything else with the bottom end. I'm a machinst by trade and speak with experience. Just don't want to see you getting ripped off by some of the experts out there. All good mate 
|
|||
| Top | |
|||
| my347 |
|
||
|
Scaffy, due to current dollar and an estimate of import taxes gonna be cheaper to buy here, so i contacted summit and cancelled order, they were fine with it as they hadn't actually ordered it themselves. Dodged a bullit on that one.
Banarcus, thanks for the info mate, i'm looking at sending the car to perth and getting BPT to build the engine and do the work. I apologise for the b**ch tone of my previous post. 
_________________ SIGNATURE PIC TO LARGE... REMOVED BY MODERATOR! |
||
| Top | |
||
| Scaffy |
|
|||
|
PM sent
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
I could see that coming
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Scaffy |
|
|||
|
Just discussing the current economic climate...
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
