|
| johnnyeHCF |
|
|||
|
So the plan was to just use the mini spool with the 3:27.1 ratio diff gears that are standard with the XG diff.
Can anyone help me out with a link to installing one of these-have had a little look but haven't found anything yet. Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Hey guys,as I mentioned the catch can is mounted through the body with some stainless screw cap bolts,have been grinding wire brushing sanding and scrubbing the sump-it got wet somewhere along the way so it had to be cleaned anyway so I may as well paint it I think.There's also pics of the sway bar spacers after 3 years and 30,000 kms-held up realy well.
Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Hey guys,so I masked up the sump and the TB last night,gave the sump one more going over this morning-wax & grease rub down and primed everything and then done them in satin black,was a bit of work but only did it because I can't afford to do much else atm so I thought why not.anyway pics.
Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Tommo52 |
|
|||
|
That's gonna be one classy looking engine bay for sure.
 
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Tommo52 wrote: That's gonna be one classy looking engine bay for sure. Cheers Tommo,just wanted to do it as I'm waiting on other bits-but turned out not to bad. Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Tommo52 wrote: That's gonna be one classy looking engine bay for sure. gotta agree with that johnnyeHCF wrote: Don't like the red & blue fittings might "grow" on ya.................. one day 
|
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Mad2 wrote: Tommo52 wrote: That's gonna be one classy looking engine bay for sure. gotta agree with that johnnyeHCF wrote: Don't like the red & blue fittings might "grow" on ya.................. one day I doubt it-love the black fittings though Hey something doesn't feel right about this sump gasket, is this different to the OEM sump gasket? Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Hey guys, so whilst undressing the spare barra,I found these- I think they were advertised as tuff mount (not 100% on that) these are to fit BA/BF fairly solid with polyurethane bushes,think I know what to do with these in the future
Just thought I'd share as you don't see a lot of these imo. Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Mad2 |
|
|||
|
||||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Mad2 wrote: :shock: Why Mad-you seem shocked   Whhy ssooo seeriouus 
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Mad2 |
|
|||
|
johnnyeHCF wrote: Mad2 wrote: :shock: Why Mad-you seem shocked Whhy ssooo seeriouus cozz............... thems serious engine mounts plus i could . . . . . . . .
|
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Hey guys,got the sump off and cleaning up the block surface etc-so yes it is the correct sump gasket (first time ever changed one) so I assume it has the same sort of problem in the corners of the half moons with sealing like the SOHC did?.
Also need to change the sway bar to a custom made one-this is from Jason at Tuff mounts.also need to clean up the cab to work out where the tailshaft loop bolts will come through. Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Hey guys, I'm bloody confused now,I thought all the BA/BF sumps were the same but this is clearly not the case,the modded/painted sump is from a BF mk2 the other is from a BA 182,How is it the same gasket for BA & BF if they are this different?
Heelllppp???????? Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Mad2 |
|
|||
|
johnnyeHCF wrote: Hey guys, I'm bloody confused now,I thought all the BA/BF sumps were the same but this is clearly not the case,the modded/painted sump is from a BF mk2 the other is from a BA 182,How is it the same gasket for BA & BF if they are this different? Heelllppp???????? Cheers Johnny. haHA......... shiiiit knows - it's cast not machined.....it's the same as the aircon outlet.........................
|
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
I know it's not a genuine ford gasket but coming from EPA I'd assume that they would know there's some differences between them.
Also how can it do BF and FG sumps when it says to 5/05 This is frustrating and clearly false advertising. Cheers Johnny. You do not have the required permissions to view the files attached to this post.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
