|
| huggiebear |
|
|||
|
hell yeah!!!!
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
after i welded the brackets, fitted the cable, i then needed to work out how to fill the gap from the ed cable end to the ef handbrake arm..
with a bit of fiddling and a little more welding. i butcherized the ed caliper arm and made a fill in piece.. Attachment: DSC01723.JPG fitted it up and... Attachment: DSC01725.JPG Attachment: DSC01724.JPG while i was at it,, as ef dont have a bracket on the backing plate for a brake line i also fitted the brake line bracket fron the ed backing plate.. Attachment: DSC01728.JPG and after all that, the hand brake seems to be working good, and considering the rear adjusters are wound all the way in.. in very happy with the results.. You do not have the required permissions to view the files attached to this post. |
||
| Top | |
||
| BenJ |
|
||
|
Nicely Done!!!!!!!
There is always more than one way to mod an Eseries LOL I like it. Cheers BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| XR-Lane |
|
|||
|
Good work mate!
|
|||
| Top | |
|||
| SWC |
|
||
|
Well done Troy, nice job.
|
||
| Top | |
||
| TROYMAN |
|
||
|
thanks guys...
now im still to pull the rear brakes back of on wednesday to fit new slotted rotors.. 
|
||
| Top | |
||
| shav |
|
|||
|
well you got lots of practice now, it should be easy for you. lol
_________________ Cheers |
|||
| Top | |
|||
| huggiebear |
|
|||
|
lol rears suck.. i hate doing those screws
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: well you got lots of practice now, it should be easy for you. lol yea ef up are easier than ed... {USERNAME} wrote: lol rears suck.. i hate doing those screws the screws that hold the disc onto the axle??? i leave them out... |
||
| Top | |
||
| huggiebear |
|
|||
|
so do i now lol little bastards are a pain
|
|||
| Top | |
|||
| ED_XR6_5 SPEED |
|
|||
|
lol i have a specialy modified screwdriver for them little screws
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| bradley4567 |
|
||
|
{USERNAME} wrote: lol i have a specialy modified screwdriver for them little screws did the grinder modify it
_________________ ef falcon daily driver |
||
| Top | |
||
| ED_XR6_5 SPEED |
|
|||
|
kinda, i ground a little bit of the tip so it fit in real snug then i drilled a hole in the handle so i can put another screwdriver in the top so its like a t-bar thing, works really well.
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| TROYMAN |
|
||
|
well i picked up my slotted rear rotors and pads today..
as we know! not a difficult task, but i know we like pics!!! the only thing i did, (that i should have done to the front!) was after cleaning the factory oil off the rotors i sprayed the centre with clear coat to prevent the hub section from rusting.. before.. Attachment: DSC01730.JPG after..  Attachment: DSC01731.JPG Attachment: DSC01729.JPG
You do not have the required permissions to view the files attached to this post. |
||
| Top | |
||
| XR-Lane |
|
|||
|
That looks tidy mate, how do they feel now?
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
