|
mik46 |
|
||
|
thanks for the help guys, i`ve sent an email off to Atomic, i`ll let you know how i go..........cheers
|
||
Top | |
stephenodgers |
|
||
|
Sorry to bring this post up, does anyone know if you can now buy head studs for an AU-6 off the shelf (other than the $400 Atomic ones)?
Cheers Steve |
||
Top | |
Vade Velociter |
|
||
|
I have a pending enquiry with ARP about head studs to suit the SOHC EA-AU 6 cylinder, as soon as I get a set and test them out to make sure I'll post some pics and more info and see how we go..
Cheers, Adam |
||
Top | |
stephenodgers |
|
||
|
So I ended up with the $400 Atomic ones (as ARP didn't have anything when i needed them), it took a fair bit of stuffing around to get it right (i.e. they sent the wrong size, then the second set was the wrong thread with 2 different bolt types....after a stern word with the manager he personally checked my 3rd parcel before it come to me, all good) but they have now been in my motor for more than 6 months with no issues. (I did have to modify my rocker cover to clear the new studs). Running over 20psi with no issues. FYI the Atomic head studs didn't come with any torque settings, turns out they need 80Nm first go (with the bolt grease on the washers), then up to 95Nmto finish.
|
||
Top | |
Vade Velociter |
|
||
|
My shipment from ARP arrived today with the studs for the SOHC six. I will test them out tomorrow to validate their correct fitment and will post up some pics etc.
|
||
Top | |
Vade Velociter |
|
||
|
FYI I contacted Atomic recently and their studs are made in house and are not ARP product. For anyone that's interested to see why ARP are so much better than any other fastener available check these clips out:
http://www.youtube.com/watch?v=e-DYp8q2fjA http://www.youtube.com/watch?v=ubb7hhRe ... ure=relmfu http://www.youtube.com/watch?v=rfLQTvy0 ... ure=relmfu I'm quite confident that Atomic don't have the facilities of ARP and don't go through the same process and so don't compare in terms of quality... |
||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Vade Velociter wrote: FYI I contacted Atomic recently and their studs are made in house and are not ARP product. For anyone that's interested to see why ARP are so much better than any other fastener available check these clips out: http://www.youtube.com/watch?v=e-DYp8q2fjA http://www.youtube.com/watch?v=ubb7hhRe ... ure=relmfu http://www.youtube.com/watch?v=rfLQTvy0 ... ure=relmfu I'm quite confident that Atomic don't have the facilities of ARP and don't go through the same process and so don't compare in terms of quality... Yet Atomic have been proven with years of use and no reported failures of head or main studs. |
||
Top | |
Vade Velociter |
|
||
|
I'm not knocking their product I just can't see how they can justify the $400 price tag...
|
||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Because they work, and they are still the only off the shelf option, everything else is custom order.
If ARP added the part number and made them easy to get, the atomic ones would drop in price. |
||
Top | |
Vade Velociter |
|
||
|
I fitted the ARP head studs in an AU block at the workshop today. Fitment is excellent, I will get ARP to make up a kit with the installation torque specs and Ultra-Torque lubricant when I place an order. At this stage I anticipate kits will cost ~ $350 with freight, duty & GST included. If you're interested please post your name and how many kits are required so I can order enough in the 1st shipment.
Cheers. |
||
Top | |
Vade Velociter |
|
||
|
This is them fitted in the block:
|
||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
For that price, it's easier to just pay the extra $50 and order them from atomic and have them arrive in the same box as all your other parts.
Because you'd also be buying main studs and a girdle. |
||
Top | |
Vade Velociter |
|
||
|
I have made a listing on eBay to offer these head studs safely and fairly to everyone. I have ordered a large quantity of stock to try and help out as many people as possible. See:
http://www.ebay.com.au/itm/ARP-HEAD-STU ... 4167bcd137 Don't hesitate to contact us at http://www.miltonengines.com.au/ |
||
Top | |
bam1992 |
|
||
Age: 32 Posts: 113 Joined: 27th Mar 2014 Ride: ford falcon el xr6 Location: nambucca heads |
hey are you getting anymore of the arp head studs will the fit an el xr6 and what price ???
atomik studs are now 600 and the are made from tool steel hence the price tag
_________________ boosted El xr6, 3 inch exhaust, machined ba 17s, super low king springs,koni shocks, custom regring by wade cams, 5 spd manual, xtreme heavy duty clutch and now much more |
||
Top | |
Vade Velociter |
|
||
|
bam1992 wrote: hey are you getting anymore of the arp head studs will the fit an el xr6 and what price ??? atomik studs are now 600 and the are made from tool steel hence the price tag I have an ARP order due in end of March. They will be ~ $360. Let me know if you'd like to backorder. They are 8740 Chromoly steel, 200 ksi tensile strength (torque to 80 ft. lbs) |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 45 guests |