|
| TROYMAN |
|
||
|
au vct injectors are the same as std au, its just the au vct has a higher fuel pressure reg..
just incase you dont go bbm, the au vct fuel rail wont bolt onto the bbm manifold without modifications... |
||
| Top | |
||
| metasaiah |
|
|||
|
^^^ er... you mean it won't fit on the LOG without mods, right?
_________________ EF2 Fairmont Ghia. AU2 engine running EF gear. Intake, exhaust, injection etc; 8" rear stockies with 265/50R15 rubber. Shiftkitted auto, J3, custom grille and dash cluster and lots of other useless crap... |
|||
| Top | |
|||
| TROYMAN |
|
||
|
metasaiah wrote: ^^^ er... you mean it won't fit on the LOG without mods, right? ummm yea,,sorry, i ment wont fit the log... 
|
||
| Top | |
||
| JakeysED |
|
|||
|
thanks for that mate i didnt no that.. so the au fuel rail wont bolt up to my ed log manifold? and ive been leaning towards savin my pennies to spend on my diff my lsd is extremely flogged and herd that they flog out pretty quik even after a reco, and most diff joints dont recomend the lokka they recomend the true track but theyre 1600 bucks! what is everyones opinions on these three options, i can get my lsd recoed for 550, a 4wd systems lokka for 500 pluss fitting??, or a true track drive in drive out for 1600?
|
|||
| Top | |
|||
| c james |
|
|||
|
yeah i have an ed xr6 lsd diff in my ed fairmont. its totaly flogged, ive herd there a s**t lsd too, im currently doin my head gasket/ port work in my head. been meaning to do my diff for months but havnt got the cash after all these other things keep coming up.. one question, what the hell is a true track??? and with your lsd. does it has heaps of movement? like jerky to drive?
_________________ ED Fairmont Ghia. t5 conversion w h/d exedy, 3:45:1 lsd, pacemaker extractors, 2.5" custom exhaust, waggott cam,K&N high flow panel filter, TI performance chip w/ 4 tune switch(2 ED, 2 EL tunes) king 18's, el thermo fan w/ Davis Craig switch. 5000K hids,led lighting, doof box in boot. |
|||
| Top | |
|||
| SWC |
|
||
|
Few things,
1) Fitting a BBM will improve low end torque, not increase HP. EF/EL BBM are the same except as Troyman said for the mount on the Upper Manifold for the Air Pipe. AU upper manifold is different to the EF/EL and also uses a different Throttle body. If fitting the BBM to the ED you will need an EL ECU to control the BBM switch over. 2) Fitting AU injectors will give you an improved spray pattern, Slight improvment in throttle response and possibly a small inprovement in Fuel Economy, nothing more, no increase in HP. 3) As for fitting an AU VCT Fuel Rail/Reg , don't waste your cash. Current rail/Reg and pump will handle anything you have that is streetable and N/A. Your J3 chip can be tuned to suit your injector need while N/A If you are going Turbo later, then save you cash as you will need even bigger injectors as well as fuel pump 4) Changing the Throttle body to anything bigger will not help, only improves at very high RPM, good if you want Dyno numbers, waste of money for the street. Current 65mm throttle body will handle big numbers, ask Troyman, I believe he is still running a 65mm Body and he has 270RwKw. 5) Upgrade your intake if and when you do the BBM. If keeping the log, thats good as there is no need to upgrade that if going Turbo, Log is actually better than the BBM for Forced induction. B Series and F series Turbos use BBM's but with the butterflys removed. One good improvement for the Log is to use the EA elbow on the throttle body, much larger than the later models. Better the moter breaths, better power increase across the rev range. 6) Head work ie Port and polish will help Increase your HP but will put a greater load on your diff, if its dodgy now it won't get any better with more RwKw. Do your Diff First. |
||
| Top | |
||
| SWC |
|
||
|
Also enclose your pod as you are sucking hot air into the engine. Also Mr Plod will do you a canary if he sees it.
|
||
| Top | |
||
| wild-el |
|
||
|
nice car mate.how did you go with the au injectors and the lsd?
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| bry40l |
|
|||
|
last i herd he crashed it?
_________________ BF XR6 |
|||
| Top | |
|||
| wild-el |
|
||
|
o shatterd guess it was enough power after all.
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| bry40l |
|
|||
|
or he was just a s**t driver
_________________ BF XR6 |
|||
| Top | |
|||
| jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
Yep theres a write up in his garage about stacking it.....
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
| Top | |
||
| wild-el |
|
||
|
hahaha shattered.looked like a nice car. alwell hope he had full comp
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| bry40l |
|
|||
|
im glad i dont have full comp on my ef fairmont, woulda ran it off a bridge or into the back of a truck long ago lol
_________________ BF XR6 |
|||
| Top | |
|||
| c james |
|
|||
|
i would have been spewingg if i crashed that, 160kw n/a is pretty good from one of these... doubt mine is making anywhere near that.. what a shame.
_________________ ED Fairmont Ghia. t5 conversion w h/d exedy, 3:45:1 lsd, pacemaker extractors, 2.5" custom exhaust, waggott cam,K&N high flow panel filter, TI performance chip w/ 4 tune switch(2 ED, 2 EL tunes) king 18's, el thermo fan w/ Davis Craig switch. 5000K hids,led lighting, doof box in boot. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 24 guests |
