|
keggs |
|
||
|
G`day all, Prob already been covered else where on forum, however, does anyone know whether a bullbar off a 96 longreach ute will fit on a 94 longreach ute. Hope someone can advise
|
||
Top | |
jonathon |
|
|||
|
should do i cant see why not ive just taken a nudge bar from a 94 ed non abs and put it to a 93 eb with abs.
some one should be able to confirm this better.
_________________ Owning 1 of 84,847 ebII. |
|||
Top | |
The Dog |
|
|||
|
Yep. It will fit.
_________________ You'll ride a black tornado across the western sky
|
|||
Top | |
keggs |
|
||
|
Thanx
|
||
Top | |
OZBMX |
|
|||
|
Just a thought, are they both xg's with the falt front as didn't xh's or atleast the xh body comeout in 96 sometime?
or would it still mount up the same?
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
Top | |
The Dog |
|
|||
|
The mounts are different from XG to XH. I was assuming (as the XH was released in 94) that the earlier vehicle was an XH. The XG mounts on the outside of the chassis using 3 bolts (same as an XF) The XH, on the other hand, mounts on a flat facia style plate but also has (on a good bar) a 10mm steel plate that extends right down into the chassis rails and has a bolt that runs through it to make it much stiffer.
_________________ You'll ride a black tornado across the western sky
|
|||
Top | |
keggs |
|
||
|
Thanks Guy`s, It wont fit as It`s off an XH (96) and mines an XG (94) bugger!!!!
|
||
Top | |
The Dog |
|
|||
|
The shape is right, it's just the mounts that are different. If you want you can fabricate mounts. Going from XH to XG is easy....the other way is a bit more involved......
_________________ You'll ride a black tornado across the western sky
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 6 guests |