Fordmods Logo

Ev's XR6 5 Speed 

 

Page 1 of 33 [ 491 posts ] Go to page 1, 2, 3, 4, 5 ... 33  Next

 
 Post subject: Ev's XR6 5 Speed
Posted: Wed Jan 12, 2011 8:58 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

Hello All,

I've been reading through a few build threads and I got the urge to show everyone my car.


The story goes like this:

Middle of 2010, I was still driving my N15 pulsar. It was getting a bit long in the Kays for a little Jap car- nearly 230,000 - and sucked at towing anything other than an empty trailer. So, I parted with $3,200 for a '96 EL.

1 month later, I learned that there is a right way and a very wrong way to ford a creek. Long story short, the car was a write off and with $2,250 of the settlement, I got this:

Attachment:
falcon1.jpg


It's a Jan '93 EBII S-XR6
Attachment:
falcon4.jpg


It has the factory MOMO steering wheel, which I'm told is quite sought after. The odometer stopped at 189,000 kM, since rectified with a replacement cog, courtesy of eBay.
Attachment:
falcon2.jpg


The best part is this:
Attachment:
falcon3.jpg


The plan is to keep it pretty much stock. Fix the aircon - got regassed and then it blew a seal and it all came out - upgrade the stereo, oh and most importantly, get it registered in NSW.

Thanks!

Evan.

P.S. Please excuse the pictures from the ad. Haven't taken any myself and it's dark outside lol.

You do not have the required permissions to view the files attached to this post.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Last edited by evxr6 on Tue Oct 30, 2012 4:54 pm, edited 7 times in total.

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Thu Jan 13, 2011 7:23 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

Update:

Here's pretty much what it looked like when I got it home.

Image

The main reason I went for a larger car was for towing the trailer to go camping. So, the first thing I needed to sort out was the goose neck for the towbar. The car has a genuine Ford towbar, so finding a gooseneck wasn't a problem. Found this at Pick 'n' Payless for $20:
Image

Image

Another thing that I fixed was the nonfunctional horn, which you need for blue slip and Sydney traffic. Turned out that the brass pins behind the steering wheel were completely worn out.
Image

Got some replacement ones for nothing. Don't bother trying to get them new. Obsolete.

Also got some red 4.0i badges for the front quarters too off eBay
Image

Previous owner (or vandals) did a pretty poor job getting the original badges off. Anyone know what's meant to be there?

Also installed a 4 channel amp. Was the easiest install I've ever done. Ford did the right thing installing the busbars on the battery terminals.
Image

Threaded the cable through the clutch cable hole.

Here's my supervisor:
Image

Thanks,

Evan.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Thu Jan 13, 2011 7:53 pm 
Getting Side Ways
Offline

Posts: 6113

Joined: 8th May 2007

nice car, nice colour

if you do a bit of camping id suggest fitting an LSD
Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Thu Jan 13, 2011 7:57 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Call down to Liverpool of Friday night and we can check her out and meet the guys and girls.
Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Thu Jan 13, 2011 8:02 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 1669

Joined: 23rd Dec 2004

Gallery: 1 images

Ride: Boosted ED XR6, EBII Mont Wgn

Power: 252 rwkw

Location: Mildura
VIC, Australia

hmmm, nothing like a black e-series :D good pick up for the $'s

evxr6 wrote:
Also got some red 4.0i badges for the front quarters too off eBay

Image

Previous owner (or vandals) did a pretty poor job getting the original badges off. Anyone know what's meant to be there?


from factory should only have the red 4ltr badge, looks like they have had a boot garnish badge on there, probably one off an ED xr6..

 

_________________

Image
[SEXYR-6] ED XR6 T5 Turbo Build
[EBW-347] EB Wagon V8 Stroker Build
FordMods Member #1761

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Fri Jan 14, 2011 11:08 am 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

sexyr6 wrote:
hmmm, nothing like a black e-series :D good pick up for the $'s


FordFairmont wrote:
nice car, nice colour

if you do a bit of camping id suggest fitting an LSD


Thanks for the kind words. :lol:

FordFairmont, already got one. Think they came standard :? . Tag says 'High Performance' and both wheels turn the same way when I turned them when the car is jacked up.
Image

When I was under there, I got a photo of the exhaust. Looks like it may be an aftermarket system, 2.5", with mandrel bends and 2 mufflers:
Image

Plus there is a sticker on the back window from 'The exhaust Shop' lol. Also makes a good noise.

What time do you guys usually meet up at KK's?

Thanks, Evan.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Fri Jan 14, 2011 12:45 pm 
NSW Cruise Moderator
Offline
User avatar

Age: 46

Posts: 7338

Joined: 5th Nov 2004

Gallery: 12 images

Ride: TE50

Location: ɹǝpun uʍop
NSW, Australia

Pretty much any time after about 7ish there is a decent crowd there. If you come out, people will gather for a look.

 

_________________

Image

I have a car.

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Thu Jun 16, 2011 8:27 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

Hello all, long time, no post.

A lot has happened since last time. We have gone for our first camping trip with the car...actually twice I've just remembered. Went down to Racecourse beach for new years and down to Gerringong. Apart from the lack of air conditioning (think the condenser inside the car blew up with the new gas), the car has performed beautifully.

Living all the way out in Minchinbury was getting a bit expensive ($360/week rent). So, when the opportunity came up to live in my girlfriend's grandmothers house, we jumped at it. Cheaper, closer to work and most importantly a shed with electricity in it.

Image

Image

But this is a car forum, so stuff that has happened with the car.

Replaced the automatic shifter bushes as the old ones were completely disintergrated. Sounds and feels so much better.

Got new pads and rotors. Old ones were severely warped. Got them done at **JAX BLACKTOWN**. Never again. Only went there because I thought that they would be able to do it on a saturday. Wrong. They couldn't fit me in, even though I had booked, so I had to wait 'till the following Monday. They charged a ridiculous amount of money and broke my bonnet release cable. At least I got a free bonnet release cable out of it. From now on I'm doing everything myself or if I'm really stuck <free plug> Girraween Motor Service</>.

The old girl caught the E-series headlight gremlin. Thank god for fordmods. Never would have worked it out otherwise. Got a new 12v 30A self reseting circuit breaker from Jaycar for $12.00

Image

Can't imagine what Ford would charge for such a thing, considering that they can charge $27.00 for a headlight relay!?!

On the sound front, I've installed a pair of Cadence 6" splits in the doors. Soooo much better than anything I have had in the past. Not hard, as I've never had splits before!

Image

Also I've acquired a Kicker 12" Sub-in-box to supplement my geriatric Sony Xplod 12". Much improvement.

Image

I had to re weld in the drivers side boot gas strut mount in. It broke the spot welds and took out the courtesy lamp wiring, blowing the fuse, and we all know what happens when that happens... Kills car. Could not for the life of me work out why the car was working ten minutes ago and now wasn't. I knew there was a bike in the shed for a reason.

After a very cold ride to work, it hit me. I wonder if the bang I heard when I closed the boot two days ago has something to do with it? After a quite warm ride home, I set to ripping out the back seat to see what destruction lay within. Sure enough, there was the positive wire shorting out on the strut. After some very careful welding and a few new crimp connections later all fixed. Gotta say that the interior lights are now brighter.


I am now waiting on a quote from the mechanics to do the front suspension bushes. They are completely gone.

While it was on the hoist, we had a good look at the soft underbelly of the Falcon. Not to bad. Found a leaking water pump and the belts could use some attention. I shall be replacing them this weekend. I've already made the water-pump-pulley-holder-whatsit from plans in my trusty Gregories. Sure got me thinking about EF/EL thermo fan conversion :?

After six months of ownership and 11,000km I'm still loving it and I could not imagine driving anything else.

Thanks, Evan.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Fri Jun 17, 2011 5:36 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 930

Joined: 6th Nov 2004

Ride: EB SXR6 | ED XR8 Sprint

Location: Sydney
NSW, Australia

Hey there.

i have the same car but in red!. I always wanted an ED XR6 but i got mine with low kms for a very good price 2 years ago. anyway i put the ED front on along with all the badges and everything else isnt much different.

things i have done to mine that i would suggest (im sure plenty of others agree here)

Thermo fans
Serpentine belt conversion
Manual Conversion

A few things i am in the process of doing now are
Cruise control
Power windows
installing sun roof


as you go camping i wouldnt suggest lowering but yeah they look awesome nice and low! i had to change the evaperator on my car as it was leaking too. i now have a VERY annoying high pitched whisle only when the compressor kicks on, very annoying and no one knows what it is!

anyway good luck with the mods and your in the right place if you have any concerns or questions!

 

_________________

EB SXR6. ED XR8 Sprint.

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Fri Jun 17, 2011 6:53 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

BOSXR8 wrote:
Hey there.

i have the same car but in red!. I always wanted an ED XR6 but i got mine with low kms for a very good price 2 years ago. anyway i put the ED front on along with all the badges and everything else isnt much different.

things i have done to mine that i would suggest (im sure plenty of others agree here)

Thermo fans
Serpentine belt conversion
Manual Conversion

A few things i am in the process of doing now are
Cruise control
Power windows
installing sun roof


as you go camping i wouldnt suggest lowering but yeah they look awesome nice and low! i had to change the evaperator on my car as it was leaking too. i now have a VERY annoying high pitched whisle only when the compressor kicks on, very annoying and no one knows what it is!

anyway good luck with the mods and your in the right place if you have any concerns or questions!


Hey, thanks for the kind words!

Yeah, I have thought about a manual conversion. Getting an itchy left foot. I have looked at eBay for a T5. There was a guy in canberra with one including pedal box, clutch & cable, bell housing... everything you need for $300. Was very temping.

Yeah no, I wouldn't want it any lower than it is. Scrapes on the bigger speed bumps and has plenty of battle-scars under there - Including a massive dent in the Cat. Exhaust smells like it's not doing anything anyway.

Thanks,

Evan.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Fri Jun 17, 2011 9:41 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

Hi Evan

We should get together soon, seeing as we live quite close, and I can show you just what can be done to a box car (EA-ED models).

I am always willing to offer advice and give a hand to enthusiastic E Series owners.

We will be heading out to Liverpool soon, but you can always PM me to arrange a meet up.

Cheers
BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Sat Jun 18, 2011 8:55 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

Hello all,

Today I conquered the water pump replacement.

Here are some of the things that you will need for the job.

Image

First thing, remove the splash guard and drain the coolant:

Image
Image

Then, using the home made water-pump-pulley-holder-thingy and modified 32mm spanner, remove clutch fan and shroud:

Image

and you should have something that looks like this:

Image

Remove all drivebelts. Might be an idea to replace them while you're doing this. Make sure that you get the correct ones- Unlike me, who bought the wrong powersteer belt, dammit! So I got the phone to my mate who was at work to see if he could pick me up the right one on his way home. Nope. He was going trailbike riding in the other direction. Doh...! The old one wasn't bad at all so I just re-used that one.

Move the power steering pump and belt tensioner out of the way and lo, behold the water pump!

Image

Remove bottom rad hose and then the water pump.

Image

and then marvel at the 18 years of coolant and oil and crap built up.

Image
Image

Fit the new o-ring on the heater pipe. Then, bolt on the new pump using RTD sealant on all the surfaces and bolt threads:

Image

When fitting the water pump pulley, I think that it is a good idea to loctite the threads and put a paint mark on the nuts to see if/when they loosen.

Image

Re-fit the power steering gear and fit and tension the drive belts:

Image

After that re-fit the clutch-fan and shroud. Be sure to loctite the threads on the fan.

Image

Re fill with coolant and run the engine at fast idle for 10 minutes with the heater on full to purge any air locks. Check for leaks:

Image
Image

Stand back and admire the Tickford Mill. Take 'arty' photo.

Image

Whole job took about 2.5 hours. Water pump and belts (admittedly one wrong one) cost about $110.00.

Thanks,
Evan

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Last edited by evxr6 on Sun Aug 05, 2012 4:00 pm, edited 1 time in total.

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Sun Jun 19, 2011 12:10 am 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

Very nice job!

Cheers
BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Mon Jun 20, 2011 6:01 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

BenJ wrote:
Very nice job!

Cheers
BenJ


Thanks man!

I'll get along to Livo one week when I have a free Friday night. I'm definitely going to All fords day.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Top
 Profile  
 
 
 Post subject: Re: evxr6's EBII
Posted: Tue Jun 21, 2011 7:58 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

Last night I bought some new gas struts for the bonnet from eBay. The ones in the car at the moment don't work very well when it's cold. Not fun when the bonnet slams shut on your head!

Cost $28.50 including freight from Melbourne. Looking forward to them.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 33  [ 491 posts ]  Go to page 1, 2, 3, 4, 5 ... 33  Next

Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 02, 2024 4:26 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names