|
ranga83 |
|
||
|
Hey guys and girls. not really a newby here, but thought it might be time to make one of these. After a long run of (cough) holdens (cough), im finally back in a ford. its not much to look at, but hopefully that'll change soon enough. Its a 96 cardinal red ef gli, factory 5 speed, ba xr6t intake snorkel, hi tech headers, 100 cpi hi flow cat, 2 1/2 inch cat back with 2 mufflers, xr rear springs, superlows in the front sitting on 16 inch sharkfins. Used to have a 977b-114lsa and standard head, that made 134rwkw before j3, 136 after. i wasnt really likeing the 977b so i changed to a tighter lsa being 977b-110. changed to a tickford head and tuned in at 154.7rwkw last weekend at A1 Gas in Hallam. Hopefully i'll get a chance to give it a fresh coat of paint over the christmas break. Interior is pretty much stock except for usual mods, trip computer, opt 20 intsrument cluster, red led dash lights and a short throw shifter. I want to do something to the interior soon just not sure what, so throw some ideas around that dont break the bank!
Attachment: PC200367.JPG Attachment: PC200368.JPG Attachment: resize 2.jpg Attachment: PC200369.JPG Attachment: dyno 6.jpg Attachment: resized.jpg
You do not have the required permissions to view the files attached to this post.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. Last edited by ranga83 on Fri Apr 19, 2013 9:53 pm, edited 1 time in total. |
||
Top | |
B Bear |
|
|||
|
Looks good mate ! Nice bit of extra power from the cam, head and j3
Is it me or does it have side skirts on it ? Looks different than stock. |
|||
Top | |
ranga83 |
|
||
|
B Bear wrote: Looks good mate ! Nice bit of extra power from the cam, head and j3 Is it me or does it have side skirts on it ? Looks different than stock. hey thanks, yeah it has skirts, but im not sure who made them. they arent real thick and the drivers side catches your foot as you get out. really need a good coat of paint, as the clear has come off the boot and bonnet and looks s**t. and now i have to replace the front bar as i ripped that off today! damn superlows. lol
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
Top | |
B Bear |
|
|||
|
Good idea, the car will always look 10 times better with some new paint. Maybe even source a fairmont front end and put that on
|
|||
Top | |
ranga83 |
|
||
|
i dont really like the fairmont front end, i like the standard ef, i had an ef xr front end to put on, but money issues meant i had to part with it. but would love to get an el xr front but with two kids i couldnt afford it. next option is just the ticky bodykit. i just read through your build thread, and even though im not a huge fan of the el look, yours is a very nice looking car. bet your hanging to get it on the dyno?
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
Top | |
B Bear |
|
|||
|
ranga83 wrote: i dont really like the fairmont front end, i like the standard ef, i had an ef xr front end to put on, but money issues meant i had to part with it. but would love to get an el xr front but with two kids i couldnt afford it. next option is just the ticky bodykit. i just read through your build thread, and even though im not a huge fan of the el look, yours is a very nice looking car. bet your hanging to get it on the dyno? Fair enough, the xr6 would be even better has that sporty feel to it. Cheers mate I have to agree with you I was never a fan of the EL fronts looked like a dopey mouth, although the body kit on the front improved it immensely. I am dying to have it on the dyno again, it's been ages since I have driven it properly but don't want to rush the work. |
|||
Top | |
ranga83 |
|
||
|
yeah no point rushing if it ends up busting something. where did you get the turbo kit from? and how much did it cost? if you dont mind me asking
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
Top | |
Chargd |
|
|||
|
nice car mate, looks to me like those skirts are from a ba xr.
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
Top | |
ranga83 |
|
||
|
Chargd wrote: nice car mate, looks to me like those skirts are from a ba xr. dont think they are ba ones. they are too round plus either my dad or i have had the car for over 10 years and they were on it before that. heres a closer pic Attachment: small skirt.jpg
You do not have the required permissions to view the files attached to this post.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
Top | |
B Bear |
|
|||
|
ranga83 wrote: yeah no point rushing if it ends up busting something. where did you get the turbo kit from? and how much did it cost? if you dont mind me asking Exactly right, I'm just hoping it all goes well on the dyno and nothing goes BANG ! So far I have spent round 3 k ? starting to lose track of it all. The turbo kit was off ebay and that was about $1500, then was exhaust work, fuel stuff, intercooler, tow trucks, other little bits and bobs that were needed and later on the tune itself. Gone over what I thought I would spend but that's to be expected. |
|||
Top | |
SWC |
|
||
|
Chargd wrote: nice car mate, looks to me like those skirts are from a ba xr. Hope you got glasses for Xmas , nothing like BA XR. Attachment: BA XR Side Skirts.jpg Look very similar to the EB/ED Sprint side skirts.... Attachment: Sprint style side skirt.jpg Attachment: Sprint style side skirt 2.jpg
You do not have the required permissions to view the files attached to this post. |
||
Top | |
ranga83 |
|
||
|
SWC wrote: Look very similar to the EB/ED Sprint side skirts.... Attachment: Sprint style side skirt.jpg Attachment: Sprint style side skirt 2.jpg they look like they are it, also looking through the kits and it looks like my rear wing is the same as the gt wing just not as high.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
Top | |
SWC |
|
||
|
I think it is something like this
Attachment: EF Rear wing.jpg
You do not have the required permissions to view the files attached to this post. |
||
Top | |
ranga83 |
|
||
|
yea thats the one, i didnt see that one. my wing is a talon wing but its not on there site.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
Top | |
SWC |
|
||
|
Talon don't appear to be producing their kit any more, only doing the XR style now for the EF/EL.
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 19 guests |