Fordmods Logo

PUSH BUTTON START , wireing helps 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: PUSH BUTTON START , wireing helps
Posted: Mon Apr 04, 2011 9:50 pm 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

hi ,basically want to obselete keybarrel , run push button start

does anybody know what i will have to do??

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
 
 Post subject: Re: PUSH BUTTON START , wireing helps
Posted: Fri Apr 08, 2011 2:46 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1149

Joined: 15th Apr 2009

Gallery: 22 images

Ride: 2013 Ford Focus ST

Power: 175 rwkw

Location: North West Sydney
NSW, Australia

Hey mate

I reckon have a read of this and chat with our forum sponsor FTG, they should be able to help you out

ferntree-gully-auto-salvage-f24/e-series-au-starter-buttons-t73351.html

 

_________________

I hate arriving at my destination as then I have to get out of my car!

New Build Thread
the-garage-f53/the-beast-v2-0-phil-s-2013-ford-focus-st-t122703.html

Old Build Thread
the-garage-f53/phil-s-bf-sr-gt-build-thread-lots-of-pics-t98705.html

Top
 Profile  
 
 
 Post subject: Re: PUSH BUTTON START , wireing helps
Posted: Sat Apr 09, 2011 12:00 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 1832

Joined: 3rd May 2007

Gallery: 8 images

Ride: AUII XR6 Uterus

Location: South Coast
NSW, Australia

if you obsolete the key barrel you will also need to remove the steering lock, install an accessories and ignition switch, then run a push button starter. and hopefully you have an imobilser. not sure how it works with coded keys either.

 

_________________

Not to get technical, but according to chemistry alcohol is a solution.

Top
 Profile  
 
 
 Post subject: Re: PUSH BUTTON START , wireing helps
Posted: Sat Apr 09, 2011 1:01 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

should be ok on the E series as they dont run a transponder in the key!

leave the damn barrel in there
this way you have the steering lock!

if u want to go like the toyos where u can just enter the car and then hit the button to start as in no key etc not a chance! way to much money involved!

easy way to set up push button start

is to run a relay
use the relay to trigger the starter
and a button on the relay
need to find the wires under the dash

i did this on my AUXR6 and worked awesome

 

_________________

RIP SCOTT

Top
 Profile  
 
 
 Post subject: Re: PUSH BUTTON START , wireing helps
Posted: Sat Apr 09, 2011 1:33 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 1832

Joined: 3rd May 2007

Gallery: 8 images

Ride: AUII XR6 Uterus

Location: South Coast
NSW, Australia

worked fine in my ea to but i kept forgetting to unlock the steering due to not needing keys lol :oops: hence my predicament.

disco franks option is the simplest. except i just picked up the standard starter relay and used that.

 

_________________

Not to get technical, but according to chemistry alcohol is a solution.

Top
 Profile  
 
 
 Post subject: Re: PUSH BUTTON START , wireing helps
Posted: Sat Apr 09, 2011 1:38 pm 
Getting Side Ways
Offline
User avatar

Posts: 627

Joined: 5th Dec 2009

Gallery: 2 images

Ride: GREEN ED XR6

Power: 249 rwkw

Location: CENTRAL WEST QLD
QLD, Australia

Google Gaurd Dawg keyless ignition.

 

_________________

AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED

Top
 Profile  
 
 
 Post subject: Re: PUSH BUTTON START , wireing helps
Posted: Sat Apr 09, 2011 1:48 pm 
Getting Side Ways
Offline

Posts: 593

Joined: 2nd Oct 2007

Power: 327 rwkw

Location: Perth
WA, Australia

I had a pushbutton installed into my old EF XR8, just removed the starter wire from the barrel and ran it through the buitton instead.
This way you still need the key for security reasons.
And not to mention its the way ford do it. In a way...
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 7:41 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names