hi..

bought a fairlane nc tape deck for 1 dolar at a garage sale and i want to know how to get a code for it or how to remove the code using software. what do i hook up to where to remove the code or what pin do i use to remove it

bought a pair of 4 ohm speakers froma garage sale, never used. got them in they work fine, one made a real rumbly noise then unsoldered a wire that goes to the cone (the end that goes to the terminals and resoldered it and it has made it better but is still there but no near where as bad. its only with one of them which is the left one.

touch the wires with your fingers that goes to the cone(cone end) and the rumble goes away totally

there is a code cracker for the ford headunits. i did have 2 versions but i have lost them over the years. there is no way to remove the passwords as its a security thing. i have 2 fairlane stereos here, one with code, the other im not sure. or contact ford with the serial number from the back and they can give it to you

What fed said......Its only a buck down the drain.