Fordmods Logo

car is idling at 3000rpm after manual conversion HELP MEEEEE 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: car is idling at 3000rpm after manual conversion HELP MEEEEE
Posted: Sat Oct 08, 2011 8:35 am 
Parts Gopher
Offline

Age: 25

Posts: 87

Joined: 10th Apr 2011

Gallery: 3 images

Ride: 1993 ED xr6

Location: Melbourne
VIC, Australia

Ok so ive just finished converting my ED xr6 to manual. the manual i got is out of a ED xr6, so have swapped computers and put the manual loom. left it for half an hour so smartlock could learn and then fired her up. revs climbed to 3000rpm and just sit there blowing smoke/fuel everywhere. i also dont understand why it would have done rings or something if i didnt even touch the motor and it was running perfect before.

i tried swapping back to the autop ecu and it did the same thing

is it something to do with the idle control valve?

and help would be appreciated

 

_________________

http://www.fordmods.com/the-garage-f53/cwhitz-ed-xr6-build-thread-introduction-t106086.html

Daily - 1993 ED XR6 - Wade 1521a - 156.2rwkw
Toy - 2009 Husqvarna TE510, converted to motard!

Top
 Profile  
 
 
 Post subject: Re: car is idling at 3000rpm after manual conversion HELP MEEEEE
Posted: Sat Oct 08, 2011 8:48 am 
Getting Side Ways
Offline

Age: 66

Posts: 2548

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia

cwhitz wrote:
Ok so ive just finished converting my ED xr6 to manual. the manual i got is out of a ED xr6, so have swapped computers and put the manual loom. left it for half an hour so smartlock could learn and then fired her up. revs climbed to 3000rpm and just sit there blowing smoke/fuel everywhere. i also dont understand why it would have done rings or something if i didnt even touch the motor and it was running perfect before.

i tried swapping back to the autop ecu and it did the same thing

is it something to do with the idle control valve?

and help would be appreciated

checkfor loose wires and vacuum hoses.gear box wirig and map sensor around the fire wall.

 

_________________

R.I.P HANS HARTMAN

Top
 Profile  
 
 
 Post subject: Re: car is idling at 3000rpm after manual conversion HELP MEEEEE
Posted: Sat Oct 08, 2011 8:55 am 
Parts Gopher
Offline

Age: 25

Posts: 87

Joined: 10th Apr 2011

Gallery: 3 images

Ride: 1993 ED xr6

Location: Melbourne
VIC, Australia

Map sensor is plugged in
im gonna try and unplug the isc and see if it idles without it

can you guys tell me if that is on the side or on top of the throttle body not sure which is which

 

_________________

http://www.fordmods.com/the-garage-f53/cwhitz-ed-xr6-build-thread-introduction-t106086.html

Daily - 1993 ED XR6 - Wade 1521a - 156.2rwkw
Toy - 2009 Husqvarna TE510, converted to motard!

Top
 Profile  
 
 
 Post subject: Re: car is idling at 3000rpm after manual conversion HELP MEEEEE
Posted: Sat Oct 08, 2011 9:04 am 
Getting Side Ways
Offline

Age: 66

Posts: 2548

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia

if the motor was fine and you swaped the gear box,is the wiring on the box correct,reverse and neutral.you swpped the ecu and wiring.

 

_________________

R.I.P HANS HARTMAN

Top
 Profile  
 
 
 Post subject: Re: car is idling at 3000rpm after manual conversion HELP MEEEEE
Posted: Sat Oct 08, 2011 9:31 am 
Parts Gopher
Offline

Age: 25

Posts: 87

Joined: 10th Apr 2011

Gallery: 3 images

Ride: 1993 ED xr6

Location: Melbourne
VIC, Australia

problem is fixed
was partly isc and cruise control cable.

disconnected isc and adjusted idle to 600rpm
and cruise control wasnt sitting in the bracket properly.

thanks everyone

 

_________________

http://www.fordmods.com/the-garage-f53/cwhitz-ed-xr6-build-thread-introduction-t106086.html

Daily - 1993 ED XR6 - Wade 1521a - 156.2rwkw
Toy - 2009 Husqvarna TE510, converted to motard!

Top
 Profile  
 
 
 Post subject: Re: car is idling at 3000rpm after manual conversion HELP MEEEEE
Posted: Sat Oct 08, 2011 10:38 am 
Getting Side Ways
Offline

Age: 26

Posts: 1472

Joined: 11th Jan 2011

Gallery: 5 images

Ride: Vixen Red 09 FG XT

Location: Dalby
QLD, Australia

Good to see you got it fixed mate! Now go have some fun ripping phat skidz with the manzzzzz :P

 

_________________

VIXEN FG XT Previous best - 14.431 @ 99.69mph with minor mods
Currently 14.235 @ 101mph same mods. Bring on the 13's!

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Dec 16, 2017 3:26 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names